Filter
Top Products
13
Basic Operating Procedure for Main Room
On the front panel:
1. Press POWER.
The STANDBY lamp on the front panel goes off, and the MAIN
ROOM ON/OFF lamp on the front panel lights red.
• For more details, “Turning the Power On and Off (Standby)”
on page 15.
The sound comes out of the speakers in the main room, and the
buttons and controls on the front panel work for the main room
operations.
2. If no sounds come out of the front speakers, press
SPEAKERS 1 (MAIN ROOM) and/or
SPEAKERS 2 (SUB ROOM) which you want to
use.
The lamp(s) on the front panel button(s) selected light(s) red.
• For more details, see “Activating the Main Room Front
Speakers” on page 17.
3. Select and play a source.
4. Turn MASTER VOLUME to adjust the volume
level of the sound from the speakers in the main
room.
From the remote control:
1. Set the multi-room operation selector to “MAIN
ROOM.”
Now the buttons and controls on the remote control work for
the main room operations.
2. Press AUDIO POWER ON.
The STANDBY lamp on the front panel goes off, and the
MAIN ROOM ON/OFF lamp on the front panel lights red.
• See also “Turning the Power On and Off (Standby)” on page
15.
The sound comes out of the speakers in the main room.
• If no sounds come out of the front speakers, press
SPEAKERS 1 (MAIN ROOM) and/or SPEAKERS 2 (SUB
ROOM) on the front panel. The SPEAKERS 1 (MAIN
ROOM) and/or SPEAKERS 2 (SUB ROOM) lamp(s) on the
front panel light(s) red.
For more details, see “Activating the Main Room Front
Speakers” on page 17.
3. Select and play a source.
• Before using the remote control, set the remote control mode
correctly. (See page 15.)
4. Press VOLUME + / – to adjust the volume level
of the sound from the speakers in the main room.
VOLUME
POWER
STANDBY
SPEAKERS
MULTI ROOM
SUB ROOMMAIN ROOM
1
2
SOURCE SELECTOR
–
+
MASTER VOLUME
SUB
ROOM
MAIN
ROOM
STANDBY ON
DVD DVD MUILTI CD TAPE/MD
TV/DBS VIDEO PHONO FM/AM
VCR 1 CDR/VCR 2
EN12_22.RX-9000V[J]/f 00.2.15, 2:53 PM13