Filter
Top Products
21
Canceling the Sub-room Operations
On the front panel:
To stop the sub-room operations and sounds
from the sub-room speakers, press SUB
ROOM ON/OFF.
The SUB ROOM ON/OFF lamp on the button
goes off, and the SUB ROOM speaker
(SPEAKERS 2) lamp and SUB ROOM
CONTROL lamp on the front panel also go off
(no sound will be heard in the sub-room).
• You cannot use this receiver for the sub-room operations any
more.
To use this receiver for the sub-room operations again
1. Press SUB ROOM ON/OFF.
The SUB ROOM ON/OFF lamp on the
button lights green, and the SUB ROOM
speaker (SPEAKERS 2) lamp on the front
panel also lights green if it has been activated.
2. Press SUB ROOM CONTROL.
The SUB ROOM CONTROL lamp on the
button lights green.
From the remote control:
To stop the sub-room operations and sounds from the sub-room
speakers, press SUB ROOM ON/OFF.
The SUB ROOM ON/OFF lamp on the front
panel goes off, and the SUB ROOM speaker
(SPEAKERS 2) lamp and SUB ROOM
CONTROL lamp on the front panel also go off
(no sound will be heard in the sub-room).
• You cannot use this receiver for the sub-room operations any
more.
To use this receiver for the sub-room operations again, press
SUB ROOM ON/OFF again.
The SUB ROOM ON/OFF lamp on the front panel lights green, and
the SUB ROOM speaker (SPEAKERS 2) lamp on the front panel
also lights green if it has been activated.
Notes:
• If you have turned off the sub-room sound with the volume level set
at more than level “30, the volume level will be automatically set at
level “30” next time you turn on the sub-room sound.
• If “TURN ON MAIN OR SUB ROOM” appears on the display, press
MAIN ROOM ON/OFF or SUB ROOM ON/OFF to listen to the
sound in the main room or in the sub-room; otherwise, the receiver
will turn off after about 1 minute.
SUB ROOM
ON/OFF
SUB ROOM
CONTROL
SUB ROOM
ON/OFF
Selecting the Sub-room Source to Play
On the front panel:
Turn SOURCE SELECTOR until the source
name you want appears on the display.
• As you turn the selector, the source changes as
follows:
CD O PHONO O TAPE (or MD) O FM O AM O DVD O
DBS O VCR 1 O CDR/VCR 2 O VIDEO O
(back to the beginning)
From the remote control:
Press one of the source selecting buttons.
DVD Select the DVD player.
CD * Select the CD player.
TAPE/MD * Select the cassette deck (or the MD recorder).
TV/DBS Select the DBS tuner.
• Does not work for selecting TV sound.
VIDEO Select video component connected to the VIDEO
jacks.
PHONO * Select the turntable.
FM/AM * Select an FM or AM broadcast.
• Each time you press the button, the band alternates
between FM and AM.
VCR 1 Select the video component connected to the VCR 1
jacks.
CDR/VCR 2 *Select the CD recorder or video component
connected to the CDR/VCR 2 jacks.
Notes:
• When you press one of the source selecting buttons on the remote
control marked above with an asterisk (
*
), the receiver
automatically turns on.
• The source lamp does not light for the sub-room source.
• You cannot select the following as the sub-room source:
– “TV SOUND”
– “DVD MULTI”
– Any digital input such as “DVD DIGITAL” or “CD DIGITAL.” You
can only select the analog input as the sub-room source.
• You can select the video components as the sub-room source;
however, you can see no pictures.
Selected source name for sub-room appears
SOURCE SELECTOR
Current volume level for sub-room is shown here
SUB ROOM
ON/OFF
SUB ROOM
CONTROL
DVD DVD MUILTI CD TAPE/MD
TV/DBS VIDEO PHONO FM/AM
VCR 1 CDR/VCR 2
EN12_22.RX-9000V[J]/f 00.2.15, 2:53 PM21