Filter
Top Products
46
Operating the Tuner (Also see pages 29 and 30)
1. Press MENU.
The MAIN MENU appears on the TV.
• Pressing one of the % / fi / @ / # buttons also displays the
MAIN MENU.
2. Press % / fi to move
to “TUNER
CONTROL,” then
press @ / #.
The TUNER CONTROL menu
appears.
3. Press % / fi to move to the item you want to
set or adjust, then press @ / #.
On the TUNER CONTROL menu, you can do the following:
“PRESET CH”: Select a preset channel station.
“BAND”: Select the band.
“FREQUENCY”: Tune in a station manually.
“FM MODE”: Select the FM reception mode.*
“PRESET MEMORY”: See “Storing the Preset Stations.”
Note:
*
Not displayed when an AM station is selected.
4. When you finish, press EXIT repeatedly until the
menu disappears from the TV.
Storing the Preset Stations (Also see page 29)
1. Press MENU.
The MAIN MENU appears on the TV.
• Pressing one of the % / fi / @ / # buttons also displays the
MAIN MENU.
2. Press % / fi to move to “TUNER
CONTROL,” then press @ / #.
The TUNER CONTROL menu appears.
3. Tune into a station on the TUNER CONTROL
menu, referring to “Operating the Tuner” above.
4. Press % / fi to move
to “PRESET
MEMORY,” then press
@ / #.
The PRESET MEMORY menu
appears.
5. Press @ / # to select a
preset station number
you want.
6. Press SET to store the setting.
7. When you finish, press EXIT repeatedly until the
menu disappears from the TV.
Assigning Names to Preset Stations
(Also see page 30)
1. Press MENU.
The MAIN MENU appears on the TV.
• Pressing one of the % / fi / @ / # buttons also displays the
MAIN MENU.
2. Press % / fi to move to “TUNER
CONTROL,” then press @ / #.
The TUNER CONTROL menu appears.
3. Press % / fi to move to “PRESET CH.”
4. Press @ / # to select a preset station.
5. Press % / fi to move
to “PRESET
MEMORY,” then press
@ / #.
The PRESET MEMORY menu
appears.
6. Press % / fi to move
to “PRESET NAME,”
then press SET.
The character entry screen
appears.
7. Press % / fi / @ / # to
move
in front of a
character you want.
You can also select the following:
: To enter space
: To erase the character
: To go back to the previous character position or go
to the next character position
8. Press SET to enter the
selected character.
9. Repeat steps 7 and 8 to
enter up to four
characters.
10.Press % / fi / @ / # to
move
to “PRESET
NAME,” then press
SET to store the setting.
The TUNER CONTROL menu
appears again.
11.When you finish, press EXIT repeatedly until the
menu disappears from the TV.
EN42_53.RX-9000V[J]/f 00.2.15, 3:23 PM46