Filter
Top Products
48
Display Messages
The following table explains the various messages
that appear in the display. Messages are also
displayed by the deck’s Self-Diagnosis function
(see page 49).
Message Meaning
Auto Cut The Auto Cut function is on
(page 17).
Blank Disc A new (blank) or erased MD
has been inserted.
Cannot Copy An attempt was made to make
a second copy from a digitally
dubbed MD (page 11).
Cannot Edit An attempt was made to edit
the MD during Program or
Shuffle Play, or to edit an MD
recorded in LP2 or LP4 stereo
recording mode. Or the MD
is record-protected.
Disc Full The MD is full (page 44).
Impossible The deck cannot do the
specified operation.
Incomplete!! Fade-in or Fade-out recording
or playback was not
successfully done due to
vibrations applied to the deck
or scratches or dirt on the
disc.
Initialize (flashing) The Setup Menu settings have
been lost, the material on the
MD was not properly
recorded, or the status of the
deck before the power was
last turned off was not
memorized. (This message
flashes in the display for
about four seconds when you
turn off the deck by pressing
?/1.)
Name Full The naming capacity of the
MD has reached its limit
(about 1,700 characters).
No Change You performed S.F. Edit
without specifying the
recording level, resulting in
no change of recording level.
No Disc There is no MD in the deck.
No Name The track or disc has no name.
No Program!! You tried to start Program
Play when no program exists.
Premastered An attempt was made to
record on a premastered MD.
ProgramFull! The program contains the
maximum number of tracks.
You cannot add any more
tracks.
REMOTE The MD deck is being
controlled by an external
device connected to the
deck.*
S.F Edit! You tried to do another
operation while the S.F Edit is
in progess. You cannot
perform any other operations
at this time.
S.F Edit NOW You pressed +/1 while in S.F
Edit (changing the recording
level after recording, Fade-in,
or Fade-out) mode. If you
turn off the deck while in S.F
Edit mode, any changes that
you have made will not saved
properly. Finish the editing
and exit S.F Edit mode before
turning off the deck. If you
wish to turn off the deck at
this time, press +/1 again
while this indication appears
in the display.
Smart Space The Smart Space function is
on (page 17).
Text Protect The CD-TEXT information
being recorded is protected
and can’t be copied.
TOC Reading The deck is checking the TOC
(Table Of Contents) on the
MD.
* If “REMOTE” appears under other circumstances,
turn off the deck, then turn it on again.