Filter
Top Products
26
Add a track to the end
of the program
Add a track at the
beginning of the
program
Press m repeatedly until “0”
flashes before the first track
number, then do steps 3 to 5
of “Programming the tracks”
on page 25.
Changing the contents of the
program
While the deck is stopped and “PGM” lights up,
do steps 1 and 2 of “Programming the tracks” on
page 25, followed by one of the procedures below:
To Do the following:
Erase a track Press m/M repeatedly
until the number of the
unwanted track flashes, then
press CLEAR.
Erase all tracks Press CLEAR repeatedly until
all the track numbers
disappear.
Adding a track in the
middle of the program
Press m/M repeatedly
until the number of the track
right after the position where
you wish to insert a track
begins to flash. Then press
./> repeatedly (or turn
./> on the deck) until
“0” flashes. Do steps 3 to 5 of
“Programming the tracks” on
page 25.
Press M repeatedly until “0”
flashes after the last track
number, then do steps 3 to 5
of “Programming the tracks”
on page 25.
Replace a track Press m/M repeatedly
until the number of the track
to be changed flashes, then do
steps 3 to 5 of “Programming
the tracks” on page 25.
Checking the contents of the
program
While the deck is stopped and “PGM”
lights up, press DISPLAY repeatedly.
The first several tracks in the program appear in
the display. To see the rest of the program, press
> repeatedly (or turn ./> clockwise on
the deck).
Creating Your Own Program
(continued)