Filter
Top Products
32
4 While monitoring the sound, press
./> repeatedly (or turn ./
> on the deck) to locate the dividing
point.
You can shift point A one frame at a time.*
The time indication (“m,” “s ,” and “f ”) of
the current point is displayed and several
seconds of the track from that point play
back repeatedly.
* Or 2 frames in LP2 stereo mode, or 4 frames
in LP4 stereo mode.
To find a point quickly
Specify a unit (minute, second, or frame) by
which the MD is advanced when you press
./> repeatedly (or turn ./> on
the deck).
To do this, press m/M in step 4
repeatedly to select “m,” “s,” or “f.” The
selected unit flashes in the display.
5 Repeat step 4 until you’ve located the
dividing point.
6 Press YES (or ./> on the deck).
“Complete!!” appears for a few seconds and
the track is divided. The deck starts to play
the newly created track. Note that new track
has no name.
To cancel the operation
Press MENU/NO or x (or x/Z on the deck).
z
You can undo the track division
For details, see “Undoing the Last Edit” on page 38.
z
You can divide tracks while
recording
For details, see “Marking Track Numbers While
Recording” on page 18.
Dividing Tracks (continued)