Filter
Top Products
4
Location and Function of Parts
Front Panel Parts Description
This chapter tells you about the location and function of the various buttons and controls on the front panel
and the supplied remote. Further details are provided on the pages indicated in the parentheses.
It also tells you about the information that appears in the display window.
?/1 z x/Z
.>
PUSHu
g
1
7
23 4 5 6
1 ?/1 (power) switch (12, 21)
Press to turn the deck on. When you turn the
deck on, the switch indicator turns off. When
you press the switch again, the deck turns off and
the indicator lights up red.
2 z button (13, 17, 18)
Press to record on the MD, monitor the input
signal, or mark track numbers.
3 MD insertion slot
Insert the MD as illustrated below.
4 Display window (6, 7)
Shows various information.
5 x/Z button (13, 21, 29)
Press to stop play, stop recording, or cancel the
selected operation.
Press to eject the MD while the deck is stopped.
6 ./> control, u button (13, 21,
22, 25, 28)
Turn to locate tracks.
Press to start play, pause play, or pause recording.
Press to carry out the selected operation.
7 Remote sensor
Point the remote towards this window ( ) for
remote operations.
With the labeled
side up
With the arrow pointing
towards the deck