Filter
Top Products
38
Erasing all the names on the
MD
You can erase all the track names and the disc
name on an MD in a single operation.
1 While the deck is stopped, playing, or
paused, press MENU/NO.
“Edit Menu” appears in the display.
2 Press ./> repeatedly (or turn
./> on the deck) until “Name ?”
appears, then press YES (or ./>
on the deck).
3 Press ./> repeatedly (or turn
./> on the deck) until “Nm All
Ers ?” appears, then press YES (or
./> on the deck).
“Nm All Ers??” appears in the display.
4 Press YES (or ./> on the deck).
“Complete!!” appears for a few seconds and
all the names on the MD are erased.
To cancel the operation
Press MENU/NO or x (or x/Z on the deck).
z
You can undo the erasing of all
the names on the MD
For details, see “Undoing the Last Edit” on page 38.
z
You can erase all the recorded
tracks and names on the MD
For details, see “Erasing all the tracks on an MD” on
page 29.
Undoing the Last Edit
You can undo the last edit operation and restore
the contents of the MD to the condition that
existed before the operation. Note, however, that
you can’t undo an edit operation if you perform
any of the following operations after the edit:
• Press z or MUSIC SYNC on the remote
• Press z on the deck
• Turn off the deck or eject the MD
• Disconnect the AC power adaptor.
./>
?/1
Z
N
Xx
.>
z
mM
–
+
g
YES
MENU/NO
1 While the deck is stopped and no track
number appears in the display, press
MENU/NO.
“Edit Menu” appears in the display.
2 Press ./> repeatedly (or turn
./> on the deck) until “Undo ?”
appears.
“Undo ?” doesn’t appear if no editing has
been done.
Naming Tracks or MDs
(continued)