Filter
Top Products
39
Editing Recorded MDs
3 Press YES (or ./> on the deck).
One of the following messages appears
depending on the last edit operation.
Last edit operation Message
Erasing a track
Erasing all the tracks on
an MD
Erase Undo?
Erasing a portion of a track
Dividing a track Divide Undo?
Combining tracks CombineUndo?
Moving a track Move Undo?
Naming a track or MD
Copying a track or disc name
Renaming a track or MD Name Undo?
Erasing a track or disc name
Erasing all the names on the
MD
4 Press YES (or ./> on the deck).
“Complete!!” appears for a few seconds and
the MD is restored to the condition that
existed before the edit operation.
To cancel the operation
Press MENU/NO or x (or x/Z on the deck).
Changing the Track
Level After Recording
(S.F Edit)
You can change the volume of recorded tracks
using S.F (Scale Factor) Edit. The original track
is recorded over at the new recording level. When
changing the recording level, you can change the
overall level, gradually increase the signal level at
the start of the track, or gradually decrease the
level at the end of the track.
./>
?/1
Z
N
Xx
.>z
mM
–
+
g
YES
MENU/NO
Changing the overall level of a
track
1 While the deck is stopped, playing, or
paused, press MENU/NO.
“Edit Menu” appears in the display.
2 Press ./> repeatedly (or turn
./> on the deck) until “S.F Edit
?” appears, then press YES (or ./
> on the deck).
3 Press ./> repeatedly (or turn
./> on the deck) until “Tr Level
?” appears, then press YES (or ./
> on the deck).
continued