Filter
Top Products
29
Editing Recorded MDs
Erasing Tracks
You can erase a track or part of a track simply by
specifying the number of the track or the portion
within a track to be erased. You can also erase all
the tracks on an MD at one time.
Erasing a track
Specify the number of the track you want to erase.
Example: Erasing the second
track
AAA BBB CCC DDD
1 2 3 4
AAA CCC DDD
1 2 3
When you erase a track, all the tracks after the one
erased are automatically renumbered. For
example, if you erase track number 2, the previous
track number 3 becomes track number 2 and the
previous track number 4 becomes track number 3,
and so on.
1 While the deck is stopped, playing, or
paused, press MENU/NO.
“Edit Menu” appears in the display.
2 Press ./> repeatedly (or turn
./> on the deck) until “Tr Erase
?” appears, then press YES (or ./
> on the deck).
The deck starts to play the track indicated by
the number in the display.
3 Press ./> repeatedly (or turn
./> on the deck) until the track
number you want to erase appears.
4 Press YES (or ./> on the deck).
“Complete!!” appears for a few seconds and
the track is erased. The track following the
erased track starts to play. If the erased track
is the last one on the MD, the track preceding
the erased track starts to play.
To cancel the operation
Press MENU/NO or x (or x/Z on the deck).
z
If “Erase ???” appears in step 4
above
The track has been record-protected on another MD
deck. If you still want to erase the track, press YES
(or ./> on the deck) again while the indication
appears.
z
To avoid confusion when erasing
more than one track
Start erasing from the highest numbered track. This
way you’ll avoid renumbering the tracks that you plan
to erase.
z
You can undo the erasure
For details, see “Undoing the Last Edit” on page 38.
Erasing all the tracks on an
MD
Do the procedure below to erase all the tracks,
track names, and disc name at once.
1 While the deck is stopped, playing, or
paused, press MENU/NO.
“Edit Menu” appears in the display.
2 Press ./> repeatedly (or turn
./> on the deck) until “All Erase
?” appears, then press YES (or ./
> on the deck).
“All Erase ??” appears in the display.
3 Press YES (or ./> on the deck).
“Complete!!” appears for a few seconds and
all the tracks, track names, and disc name are
erased.
To cancel the operation
Press MENU/NO or x (or x/Z on the deck).
z
You can undo the erasure
For details, see “Undoing the Last Edit” on page 38.
continued