Sony MDS-PC3 Stereo System User Manual


 
22
Playing a Specific Track
You can use the following procedure while the
deck is playing, stopped, or paused to quickly find
the beginning of the next track you want to play.
?/1
Z
N
Xx
.>
z
mM
+
g
./>
N
Locating a track
To go to Do the following:
Locating a Particular
Point in a Track
You can locate a particular point in a track during
play or play pause.
?/1
Z
N
Xx
.>
z
mM
+
g
m/M
Locating a point while
monitoring the sound
Hold down m/M during play.
You will hear intermittent playback as the disc
goes forward or reverse. When you reach the
point, release the button.
Notes
If the disc reaches the end while youre pressing
M, the deck stops.
Tracks that are only a few seconds long may be too
short for monitoring. For such tracks, play the MD
at normal speed.
Locating a point by observing
the time indication
Hold down m/M during play pause.
The elapsed playing time of the track appears in
the display. When you reach the point, release the
button. No sound is output during this time.
z
When - Over - appears in the
display
The disc has reached the end while youre pressing
M. Press m (or turn ./>
counterclockwise on the deck) to go back.
The next or a
succeeding track
during play
Press > repeatedly (or turn
./> clockwise on the
deck).
A preceding track
during play
Press . repeatedly (or turn
./> counterclockwise
on the deck).
The beginning of the
current track during
play
Press .(or turn ./>
counterclockwise on the deck)
once.
A specific track while
the deck is stopped
z
To locate the last track of the MD
quickly
While the deck is stopped, press . repeatedly (or
turn ./> counterclockwise on the deck).
z
If you locate a track while the
deck is stopped or paused
The deck will still be stopped or paused at the
beginning of the located track.
Press ./> repeatedly
(or turn ./> on the
deck) until the track number
you want to go to appears in
the display, then press N (or
NX on the deck).