Filter
Top Products
36
Naming Tracks or MDs
(continued)
Copying a track or disc name
You can copy an existing track or disc name and
use it to name another track on the same disc or
the disc itself.
1 While the deck is stopped, playing, or
paused, press MENU/NO.
“Edit Menu” appears in the display.
2 Press ./> repeatedly (or turn
./> on the deck) until “Name ?”
appears, then press YES (or ./>
on the deck).
3 Press ./> repeatedly (or turn
./> on the deck) until “Nm
Copy ?” appears, then press YES (or
./> on the deck).
4 Press ./> repeatedly (or turn
./> on the deck) until the
number of the track (when copying the
track name) or “Disc” (when copying
the disc name) flashes, then press YES
(or ./> on the deck) to copy the
selected name.
When “No Name” appears in the
display
The selected track or disc has no name.
5 Press ./> repeatedly (or turn
./> on the deck) until the
number of the track (when naming a
track) or “Disc” (when naming a disc)
flashes, then press YES (or ./>
on the deck) to enter the copied name.
“Complete!!” appears for a few seconds and
the name is copied.
7 Press M (or ./> on the deck).
The flashing character is entered and lights
continuously and the cursor shifts to the
right.
D
If you’ve selected numbers
Press the corresponding number button.
The number is entered and the cursor shifts
to the right.
8 Repeat steps 5 to 7 to enter the rest of
the name.
To change a character
Press m/M repeatedly until the character
to be changed flashes, then repeat steps 5 to
7.
To erase a character
Press m/M repeatedly until the character
to be erased flashes, then press CLEAR.
9 Press YES.
The whole name appears in the display.
“Complete !!” appears for a few seconds and
the track or the MD is named.
To cancel the operation
Press MENU/NO or x (or x/Z on the deck).
z
You can undo the naming of a
track or MD
For details, see “Undoing the Last Edit” on page 38.