Filter
Top Products
14
Adjusting the Recording
Level
Do the procedure below to adjust the recording
level.
?/1
Z
N
Xx
.>z
mM
–
+
g
DISPLAY
LEVEL +/–
1 Do steps 1 to 6 of “Recording on an
MD” on pages 12 and 13.
2 Play the portion of the program source
with the strongest output.
3 Press DISPLAY repeatedly until the
peak level meters appear.
4 While monitoring the sound, press
LEVEL +/– repeatedly (or turn
./> on the deck) to adjust the
recording level to its highest level
without turning on the rightmost
indicators on the peak level meters.
Occasional lighting of the indicators is
acceptable.
5 Stop playing the program source.
z
To play from the first track of the
MD after recording
1Press x (or x/Z on the deck) again after stopping
recording.
2Press N (or NX on the deck).
The deck starts to play from the first track of the
MD.
Note
You can’t record over existing material when Shuffle
Play (page 24) or Program Play (page 25) has been
selected. “Impossible” appears in the display at this
time.
Recording on an MD (continued)
Make sure that those indicators do
not always turn on.