Filter
Top Products
E-35
iPod, iPhone and iPad connection (USB 2 only)■
Insert the connector to the iPod, iPhone or iPad.
iPad
Connector
Place the iPad to the stand for iPad.
iPad
Stand for iPad
Connect the iPod, iPhone or iPad to the unit via USB connector.
USB 2
Caution:
At USB-2 (iPod) mode, once the iPod or iPhone is docked onto
the unit, the iPod or iPhone will automatically start charging. ‘iPod
Dock Charge Mode’ will be displayed. In order to use USB-2 (iPod)
function, the iPod or iPhone must be removed from the docking
station.
This product is made for iPod, iPhone and iPad. To prevent random
interference when iPod, iPhone or iPad is connected, the headphone
output is disabled, and “HP INVALID” will be displayed.
You may also experience brief audio interference during
incoming calls.
USB 2 terminal does not support VIDEO out.
iPod, iPhone and iPad can be used on USB 2 terminal.
iPod, iPhone or iPad playback (USB 2)■
Press the ON/STAND-BY button to turn the power on.
Press the iPod <TV OUT> button repeatedly on the remote control
or SELECTOR button repeatedly on the main unit to select USB-2
(iPod) function.
�
2�
3�
●
●
●
●
�
2�
Connect iPod, iPhone or iPad to the unit. USB - 2 (iPod) will appear.
Press the
on the main unit or button on the remote control to
start playback.
iPhone playback■
Sound will only switch from iPhone to the main unit after
authentication process is completed in approximately 10 seconds.
Incoming calls will pause the playback.
Once the calls are answered, the conversation can only be heard
through the built-in iPhone speaker. Turn on the iPhone speaker or
undock the iPhone to start conversation.
iPod and iPhone connection (Dock only)■
Note:
Docking station is not recommended for iPad connection.
Adaptor for iPod and iPhone connection
Notes:
Please use the adaptor supplied with your iPod or iPhone unit.
You can use an audio cable to connect your iPod to the AUDIO IN
socket if:
your iPod adaptor does not t into the iPod dock on the main unit.
you have an iPod that does not have an iPod adaptor.
you have an iPod that does not have an iPod 30 pin connector.
Adaptor No. iPhone Description Capacity
12 iPhone 4GB & 8GB & 16GB
15 iPhone 3G 8GB & 16GB
15 iPhone 3GS 16GB & 32GB
19 iPhone 4 16GB & 32GB
To insert adaptor for iPod or iPhone ■
Open the docking station for iPod and iPhone by pulling up.
Insert the adaptor for iPod or iPhone into unit and connect your iPod
or iPhone.
3�
4�
●
●
●
●
●
●
1.
2.
3.
iPhone
iPhone (bottom)
Dock connector
Adaptor for iPhone
Dock for iPhone
Connector for iPhone
Caution:
Unplug all accessories from the iPod or iPhone before inserting it into
the dock.
To remove adaptor for iPod or iPhone ■
Insert the tip of a screwdriver (“–” type,
small) into the adaptor hole as shown and
lift upward to remove.
iPod or iPhone playback (Dock only)■
Press the ON/STAND-BY button to turn the power on.
Press the iPod <TV OUT> button repeatedly on the remote control
or SELECTOR button repeatedly on the main unit to select iPod
function.
Insert iPod or iPhone unit into the dock of main unit. “iPod” will
appear.
Press the (iPod or iPhone
) button to start playback.
�
2�
3�
4�
Listening to the iPod, iPhone or iPad (continued)