Sharp XL-BD601PH Stereo System User Manual


 
E-9
USB , USB 2 terminals and Video Out socket
Rear
USB 1
Terminal
HDMI Terminal
VIDEO OUT
socket
USB  terminal:
This terminal is only for USB memory devices to support music,
video, photo and memory expansions for BD-LIVE.
VIDEO OUT socket:
This socket is only for iPod and iPhone video out connection.
Front
USB 2
Terminal
USB 2 terminal:
This terminal is only for iPod, iPhone and iPad. It does not support
USB memory device.
HDMI terminal:
This terminal supports DISC function (BD, DVD, CD and USB 1), TV
ARC and AQUOS LINK.
Aerial connection
Supplied FM aerial:
Connect the FM aerial wire to the FM 75 socket and position the
FM aerial wire in the direction where the strongest signal can be
received.
External FM aerial:
Use an external FM aerial (75 ohms coaxial cable) for better reception.
When an external FM aerial is used, disconnect the supplied FM
aerial wire.
Note:
Placing the aerial on the unit or near the AC power lead may cause
noise pickup. Place the aerial away from the unit for better reception.
Speaker connection
Connect the wire without insulation tube to
the minus (–) terminal, and the wire with red
insulation tube to the plus (+) terminal.
Use speakers with an impedance of 6 ohms
or more, as lower impedance speakers can
damage the unit.
Do not mistake the right and the left channels. The
right speaker is the one on the right side when you
face the unit.
Incorrect
Do not let the bare speaker wires touch each other.
Do not allow any objects to fall into or to be placed in the bass
reex ducts.
Do not stand or sit on the speakers. You may be injured.
Make sure to unplug the AC power lead before making any connections.
System connections
Right
speaker
Left
speaker
TV
Video cable
(not supplied)
Wall socket
(AC 220 - 240 V ~ 50/60 Hz)
FM aerial
Red
To video input socket (for iPod video connection only)
HDMI cable
To HDMI input terminal