Filter
Top Products
E-3
General control (continued)
Bass control■
Press the BASS/TREBLE [X-
BASS] button to select “Bass”.
Within 5 seconds, press the
VOLUME (+ or –) button to
adjust the bass.
�
2�
- 5 ↔ - 4
........
↔ + 4 ↔ + 5
Treble control■
Press the BASS/TREBLE [X-BASS]
button to select “Treble”.
Within 5 seconds, press the VOLUME (+
or –) button to adjust the treble.
�
2�
- 5 ↔ - 4
........
↔ + 4 ↔ + 5
Function Selector■
When the SELECTOR button on main unit is pressed, the current
function will change to different mode. Press the SELECTOR button
repeatedly to select desired function.
Line In TV (ARC)Audio In
Digital In iPod
USB-2
(iPod)
FM MONO
DISC
FM STEREO
Note:
The backup function will protect the memorised function mode for
a few hours should there be a power failure or the AC power lead
becomes disconnected.
Setting the clock (Remote control only)
In this example, the clock is set for the 24-hour (0:00) display.
Press the ON/STAND-BY button to turn the power on.
Press the CLOCK/TIMER button.
Within 10 seconds, press the ENTER button. To adjust the day,
press the or button and then press the ENTER button.
�
2�
3�
Press the or button to select 24-hour or 12-hour display and
then press the ENTER button.
The 24-hour display will appear.
(0:00 - 23:59)
The 12-hour display will appear.
(AM 12:00 - PM 11:59)
The 12-hour display will appear.
(AM 0:00 - PM 11:59)
To adjust the hour, press the or button and then press the
ENTER button. Press the or button once to advance the time
by 1 hour. Hold it down to advance continuously.
To adjust the minutes, press the or button and then press the
ENTER button. Press the or button once to advance the time by
1 minute. Hold it down to advance the time by 10 minutes interval.
To conrm the time display:
Press the CLOCK/TIMER button. The time display will appear for
about 10 seconds.
Note:
When power supply is restored after unit is plugged in again or after a
power failure, reset the clock (page 42).
To readjust the clock:
Perform “Setting the clock” from step 1. If the “Clock” does not
appear in step 2, step 4 (for selecting the 24-hour or 12-hour display)
will be skipped.
To change the 24-hour or 2-hour display:
Clear all the programmed contents. [Refer to “Factory reset, clearing
all memory” on page 42 for details.]
Perform “Setting the clock” from step 1 onwards.
Before Starting Playback
Language Setting■
Changing the on-screen display language
At the Home Screen, press
/
to select “Settings”, then press or
ENTER.
Press / to select “On Screen Language”, then press or ENTER.
HOME
Video
Music
Picture
Audio Video Settings
Smart Settings
AQUOS LINK
Playback Setting
On Screen Language
Communication Setup
Version
USB Memory Management
Software Update Settings
System
e-Contents
Settings
ENTER EXIT
Select
Enter Return Exit
Press
/
to select the language you want to display on the
screen, then press ENTER.
4�
5�
6�
�
2�
�
2�
3�
English Nederlands Česky
Deutsch Svenska Magyar
Français Dansk Slovensky
Italiano Norsk Slovenščina
Español Suomi
Português Polski
Note:
To select the DVD disc language, such as subtitle language, etc.,
see page 19.
Operating a TV Using the Remote Control■
The Universal Remote Control may operate the basic functions of the
SHARP TV.
TV function control
TV Power: POWER
TV-AV Selector: INPUT
TV Volume up/down: VOL e/f
TV Channel up/down: CH r/s
●
●
●
●
●