E-6
Disc Precautions■
Be Careful of Scratches and Dust
BD, DVD and CD discs are sensitive to dust, ngerprints and
especially scratches. A scratched disc may not be able to be played
back. Handle discs with care and store them in a safe place.
Proper Disc Storage
Place the disc in the centre of the disc case
and store the case and disc upright.
Avoid storing discs in locations subject to
direct sunlight, close to heating appliances or
in locations of high humidity.
Do not drop discs or subject them to strong
vibrations or impacts.
Avoid storing discs in locations where there
are large amounts of dust or moisture.
Handling Precautions
If the surface is soiled, wipe gently with a soft, damp (water only)
cloth. When wiping discs, always move the cloth from the centre
hole toward the outer edge.
Do not use record cleaning sprays, benzene, thinner, static
electricity prevention liquids or any other solvent.
Do not touch the surface.
Do not stick paper or adhesive labels to the disc.
If the playing surface of a disc is soiled or scratched, the Unit may
decide that the disc is incompatible and eject the disc tray, or it
may fail to play the disc correctly. Wipe any dirt off the playing
surface with a soft cloth.
Cleaning the Pick Up Lens
Never use commercially available cleaning discs. The use of these
discs can damage the lens.
Request the nearest service centre approved by SHARP to clean
the lens.
Warnings about dew formation
Condensation may form on pick up lens or disc in the following
conditions:
Immediately after a heater has been turned on.
In a steamy or very humid room.
When the Unit is suddenly moved from a cold environment to
a warm one.
●
●
●
●
●
●
●
●
●
–
–
–
When condensation forms:
It becomes difcult for the Unit to read the signals on the disc
and prevents the Unit from operating properly.
To remove condensation:
Take out the disc and leave the Unit with the power off until
the condensation disappears. Using the Unit when there is
condensation may cause malfunction.
License and Copyright■
Audio-visual material may consist of copyrighted works which must
not be recorded without the authority of the owner of the copyright.
Refer to relevant laws in your country.
“This item incorporates copy protection technology that is
protected by U.S. patents and other intellectual property rights
of Rovi Corporation. Reverse engineering and disassembly are
prohibited.”
Manufactured under license from Dolby Laboratories. “Dolby” and
the double-D symbol are trademarks of Dolby Laboratories.
Manufactured under license under U.S. Patent Nos: 5,956,674;
5,974,380; 6,226,616; 6,487,535; 7,392,195; 7,272,567; 7,333,929;
7,212,872 & other U.S. and worldwide patents issued & pending.
DTS-HD, the Symbol, & DTS-HD and the Symbol together are
registered trademarks & DTS-HD Master Audio | Essential is a
trademark of DTS, Inc. Product includes software. © DTS, Inc. All
Rights Reserved.
is a trademark of DVD Format/Logo Licensing Corporation.
“HDMI, the HDMI logo and High-Denition Multimedia Interface
are trademarks or registered trademarks of HDMI Licensing LLC in
the United States and other countries.”
“x.v.Colour” and “x.v.Colour” logo are trademarks of Sony
Corporation.
Java and all Java-based trademarks and logos are trademarks
or registered trademarks of Sun Microsystems, Inc. in the United
States and/or other countries.
“AVCHD” and the “AVCHD” logo are trademarks of Panasonic
Corporation and Sony Corporation.
Blu-ray Disc™, Blu-ray™, Blu-ray 3D™, BD-Live™, BONUSVIEW™,
and the logos are trademarks of the Blu-ray Disc Association.
YouTube is a trademark of Google Inc.
DivX®, DivX Certied®, DivX Plus
TM
HD and associated logos are
trademarks of DivX, Inc. and are used under license.
LC_LCFONT+ and LC logo mark are
registered trademarks of SHARP Corporation. This product is
embedded with LC Font technology, which was developed by
SHARP Corporation for clearly displaying easy-to-read characters
on an LCD screen. However, other non-LCD fonts are used for
displaying some screen pages.
●
●
●
●
●
●
●
●
●
●
●
●
●
●
“Made for iPod,” “Made for iPhone,” and “Made for iPad” mean
that an electronic accessory has been designed to connect
specically to iPod, iPhone, or iPad, respectively, and has been
certied by the developer to meet Apple performance standards.
Apple is not responsible for the operation of this device or its
compliance with safety and regulatory standards. Please note that
the use of this accessory with iPod, iPhone, or iPad may affect
wireless performance.
●
Important Information