Pioneer SX-LX70SW Home Theater System User Manual


 
Recording
06
97
En
3 Select ‘Initial Setup’ > ‘Options2’ > ‘Pause Live TV’
> ‘TV’s Tuner’.
4 Select ‘Initial Setup’ > ‘Analog Tuner’ > ‘Auto
Channel Setting’ > ‘Download from TV’.
If the Download from TV option appears grayed out,
check the connections to your TV and try again.
Depending on your TV, you might have to switch off
and unplug it for a few moments before plugging it
back in and switching it on again.
5 Follow the on-screen instructions.
Using the recorder’s internal tuner for Pause Live TV
If you haven’t connected to your TV using a SCART cable
(or your TV is not compatible with AV Link) you can use
the recorder’s internal tuner for the Pause Live TV.
1 Press HOME MENU.
2 Select ‘Initial Setup’ > ‘Options2’ > ‘Pause Live TV’
> ‘Recorder’s Tuner’.
See
Pause Live TV
on page 160 to do this.
You can record the channel selected on the recorder.
Using Pause Live TV
1
(LCD page 1)
Start recording the current TV
channel.
Recording continues with playback paused.
Note that it may take up to 10 seconds for recording
to start.
2
Press to start playback.
You can also use the scan buttons (
/
), pause (
)
and stop (
) — all without affecting the recording.
3 Press to stop the recording.
The operation is slightly different depending on the
viewing source. See the
Operation table
below for details.
Tip
•When the
Pause Live TV
setting (see page 160) is set to
TV’s Tuner
, you can press
P.LIVE TV
while the
recorder is in standby to switch on and immediately
start recording. When set to
Recorder’s Tuner
, it is not
possible to use the Pause Live TV feature from standby.
After pressing
P.LIVE TV
, it will take at least 10
seconds for the picture to change (during this time,
all controls except the power button are inoperative).
(Note that startup from standby is not possible if you
have selected
Recorder’s Tuner
in
Pause Live TV
on
page 160.)
Please note that you can’t record from another
component (VCR, etc.) that is connected by a SCART
cable to the
AV2 (INPUT 1/DECODER)
connector
using the Pause Live TV feature.
Operation table
*1 No Chase Play! Warning if you change input this will stop the recording.
P.LIVE
TV
STOP
REC
Viewing source
TV/DVD
mode of DVR
DVR source
Pause Live TV
function button
Condition
TV built-in analog tuner TV Pause Live TV Preset channel of DVR and TV are matched after
downloading from TV.
Direct TV recording
*1
Preset channel of DVR and TV are NOT matched after
downloading from TV.
Record TV programme that you’re
watching.
TV built-in digital tuner TV Direct TV recording
*1
Preset channel info. in D.TV cannot be shared by DVR even
after Download from TV. Record TV programme that you’re
watching.
External input of TV TV Direct TV recording
*1
Record TV programme that you’re watching.
DVR built-in analog tuner DVD DVR built-in
analog tuner
Pause Live TV
DVR built-in digital tuner DVD DVR built-in
digital tuner
Pause Live TV
02SDVRLX70D_EN.book 97 ページ 2007年7月18日 水曜日 午前10時9分