Using the digital electronic programme guide
05
86
En
Using the Digital EPG
Using the Digital EPG you can check the schedule of
digital TV programmes, view information about desired
programmes, and/or select programmes.
1 Press to display the Digital EPG screen.
The EPG screen updates automatically if the EPG data is
acquired successfully. If not, the Digital EPG screen
shows a blank image.
2 Select a TV programme.
• Press
/
(LCD page 1)
to skip to the next or
previous channel list page.
• Information about the selected programme appears
in the information window.
1
• To watch a programme currently on air, select the
programme (then press
ENTER
).
• You can check information about programmes
scheduled up to one week ahead, depending on
conditions.
• Depending on conditions, it may take some time to
acquire EPG data.
3 Press to view more information about the
selected programme.
Detailed information appears in the schedule window.
If the screen contains further information,
More ...
is
displayed.
• To quit the display of detailed information, press
INFO
again (or
RETURN
).
4 Press to exit the Digital EPG screen.
Setting timer programmes
Using the Digital EPG, it’s easy to set digital TV
programmes for recording
2
.
1 Press to display the Digital EPG screen.
2 Select a programme.
• Select a programme currently on-air: press
ENTER
to
close the Digital EPG screen and watch the channel
immediately, or press
RED
to set the programme for
recording immediately.
• Select a programme not yet started then press
ENTER
or
RED
to set the programme for recording.
Note
1 The general programme list does not show programmes that have already finished.
GUIDE
D007
INFO
2 For more information on timer programmes, see
About timer recordings
on page 98.
************
14:0513:40-
*************
**************************
More...
D007
GUIDE
GUIDE
ENTER
D007
02SDVRLX70D_EN.book 86 ページ 2007年7月18日 水曜日 午前10時9分