Recording
06
93
En
Using the built-in A.TV and D.TV tuners
Switching between A.TV and D.TV tuners
•
(LCD page 2)
Press to switch between D.TV
(digital) and A.TV (analog).
Changing channels
There are a number of ways to select analog and digital
TV channels.
1
Note that you can’t change the TV channel
during playback, recording or during recording standby.
• CH +/– buttons
(LCD page 2)
• Number buttons
(LCD page 2)
For example, to select channel 4 (digital channel
D004), press
4
then
ENTER
; for channel 34 (digital
channel D034), press
3
,
4
,
ENTER
.
2
• For D.TV channels only, you can also use the Channel
List — see below.
Tip
• When changing terrestrial digital broadcast
channels, channels with a low signal strength may
result in a black screen being displayed.
• For other channels, it may take a short while for the
channel picture to appear, and/or for the channel
number to appear.
• In both of the above cases, some improvement may
be possible by adjusting the antenna.
Using the D.TV Channel List
When in D.TV mode, you can call up the on-screen Channel List
anytime by pressing
ENTER
. Use the
/
buttons to select a
channel, then press
ENTER
to switch to that channel.
3
Displaying a channel banner
A channel banner shows programme titles, start and end
times of the current programme and other channel
information. The information is updated every minute.
• Press to display the channel banner for the
current channel.
• Use the
/
buttons to display the channel banner
for other channels. To switch to the displayed
banner’s channel, press
ENTER
.
• The channel banner displays the Subtitles ( ) and
Teletext/MHEG ( ) icon if they apply to the selected
channel.
4
• To see more detailed channel information, press
INFO
again.
5
Use the
/
buttons to display information about
previous and following programmes. Use the
/
buttons to see information about other channels.
• If there is still more information to be displayed,
More ...
is displayed; press the
BLUE
button to see
the extra information.
• To hide the channel banner, press
RETURN
.
Note
1• If you select a locked channel, you will need to enter your password to access it.
• While listening to D.TV radio channels, the screen saver automatically starts after no button has been pressed for three minutes.
2 Analog channel presets are numbered 1 to 99; digital channel presets are numbered D001 to D999.
A.TV/
D.TV
CH
-
+
1 2 3
4 5 6
7 8 9
0
3• If you select a locked channel, you will need to enter your password to access it.
• While listening to D.TV radio channels, the screen saver automatically starts after no button has been pressed for three minutes.
4 Due to inaccurate information provided by the broadcaster, some icons may occasionally be present or absent in error.
5 Not all channels supply more detailed information.
D001
D002
D003
D004
************
************
******
************
D005
D006
****
******
INFO
Wed.30.Apr 12:46
Now
D001
************
Next
********************
*************
12:00
12:30
11:30
12:00
-
-
Now
************************
More...
12:0011:30-
02SDVRLX70D_EN.book 93 ページ 2007年7月18日 水曜日 午前10時9分