Filter
Top Products
HDMI Control
10
45
En
• Connect the plasma television directly to this unit.
Interrupting a direct connection with other amps or
an AV converter (such as an HDMI switch) can cause
operational errors.
• Only connect components you intend to use as a
source to the HDMI input of this unit. Interrupting a
direct connection with other amps or an AV converter
(such as an HDMI switch) can cause operational errors.
Important
• When connecting this system or changing
connections, be sure to switch the power off and
disconnect the power cord from the wall socket.
After completing all connections, connect the power
cords to the wall socket.
•
After connecting this unit to an AC outlet, a 15-second
initialization process begins. You cannot carry out
any operations during initialization. The
HDMI
indicator on the display unit blinks during
initialization, and you can turn this unit on once it has
stopped blinking.
• To get the most out of this function, we recommend
that you connect your HDMI component not to a
plasma television but rather directly to the HDMI
terminal on this unit.
Setting the HDMI options
You must adjust the settings of this unit as well as HDMI
Control-compatible connected components in order to
make use of the HDMI Control function. For more
information see the operating instructions for each
component.
Setting the HDMI Control mode
Choose whether to set this unit’s HDMI Control function
On
or
Off
. You will need to set it to
Control On
to use the
HDMI Control function.
• When using a TV not manufactured by Pioneer, put
this setting to
Control Off
.
1 Press SETUP.
2 Select ‘HDMI Setup’ then press ENTER.
3 Select ‘HDMI Ctrl’, then press ENTER.
4 Adjust the setting then press ENTER to
confirm.
•
Control On
– Enables the HDMI Control function.
When this unit’s power is turned off and you have a
supported source begin playback while using the
HDMI Control function, the audio and video output
from the HDMI connection are output from the
plasma television.
•
Control Off
– The HDMI Control is disabled.
Synchronized operations cannot be used. When this
unit’s power is turned off, audio and video of sources
connected via HDMI are not output.
HDMI cable
HDMI cable
HDMI input
HDMI output
HDMI input
HDMI OUT
Other amps
or AV converter
Receiver subwoofer
HDMI Control-compatible
Pioneer plasma television
HDMI cable
HDMI cable
HDMI input
HDMI output
HDMI IN
HDMI OUT
Other amps or AV converter
Receiver subwoofer
HDMI Control-compatible
Pioneer plasma television
SETUP
ENTER
ENTER
ENTER
01SX-SW70SW_EN.book 45 ページ ２００７年７月１７日 火曜日 午後８時２８分