Filter
Top Products
Getting started
03
73
En
• If you cannot receive any of the Host Channels (see
the above table) then you won’t be able to use the
GUIDE Plus+ system. In this case do not set the
postal code (or set Country to
Other
) in the GUIDE
Plus+ setup screen. (When GUIDE Plus+ service
starts in your area, set the postal code again.)
If digital broadcasts start in your area, please set the
EPG Type Select
setting in the Initial Setup menu to
Digital EPG
.
• Even if you can’t use the EPG functions where you
live, you can still set VIDEO Plus+ recordings and
manual recordings — see
Setting a manual recording
on page 81.
• The front panel display shows
EPG
when receiving
data. If you power on the recorder during an EPG
download, the download is cancelled.
• EPG data may be received several times a day. All
updates are automatic.
• When downloading EPG data, the recorder may
sound as though it is on. This is normal.
Checking the downloaded data the
following day
1 Display the GUIDE Plus+ screen.
You should see a grid filled with channel logos and TV
listings information. Use the
/
buttons to review the
list. If you notice that there are channels missing, or that
there are channels in the list that you don’t get, go to the
Editor screen:
• Press
repeatedly until the Menu bar is highlighted.
• Press
until
Editor
is highlighted. The main area of
the screen now shows a list of channels. Those that
are turned
ON
are displayed in the grid; those that
are
OFF
are hidden. Use the
///
buttons to
move down the list and turn channels
ON
or
OFF
as
necessary.
• For any channel that you turn
ON
, the GUIDE Plus+
system will need to know how it is received (the
source) and on which programme number. The
source may be the built-in tuner of this recorder, or
an external receiver. The programme number is the
number on which the channel can be found on its
receiving device/source. The entry in the Editor
screen must match this number for correct recording
of that channel.
• The above is especially important for the ‘Host
Channel’. Please make sure that the Host Channel is
always switched
ON
.
2
(LCD page 2)
Change the programme
numbers as you like.
Changing the programme numbers allows you to decide
the order in which the channels change when stepping
through them sequentially. You can do this to group
certain channels together, for example.
3 When you’re done, press the BLUE Action button
(Home) to get back to the GUIDE Plus+ home screen.
• You can find detailed information on using the GUIDE
Plus+ system in the following chapter.
GUIDE
1 2 3
4 5 6
7 8 9
0
D. TV 001
D. TV 002
D. TV 003
D. TV 004
D. TV 005
Ext. Rec. 1 007
D. TV 006
D. TV 014
D. TV 017
BBC1
Name On/Off Source Prog. No.
On
BBC2 On
ITV On
CH4 On
CH5 On
BBC3 On
ITV2 On
E4 Off
UKGOL On
02SDVRLX70D_EN.book 73 ページ ２００７年７月１８日 水曜日 午前１０時９分