Filter
Top Products
47
Installation and Connection of Height Speakers
Top Middle
Install the Top Middle speakers in the position just
above the listening position. Use Ceiling speakers as the
Top Middle speakers.
Change the setting: Press RCV and then HOME on the
remote controller, select "Setup" - "2. Speaker Setup" -
"Speaker Settings" and set "Height Speakers Type" to "Top
Middle".
Dolby Enabled Speaker (Front)
Dolby Enabled Speaker (Front) is specially designed
to be used as a Height speaker. It is to be placed on the
top board of front speakers as shown in the figure. Dolby
Enabled Speakers placed with their diaphragms facing
toward the ceiling create higher effect in the Dolby Atmos
and Dolby Surround listening modes by providing sounds
echoing off the ceiling.
r
There is integrated type of Dolby Enabled Speakers with
the normal speakers. When using the integrated type of
Dolby Enabled Speakers, place it to the Front speakers
position.
Change the setting: Press RCV and then HOME on the
remote controller, select "Setup" - "2. Speaker Setup" -
"Speaker Settings" and set "Height Speakers Type" to
"Dolby Enabled Speaker (Front)" as shown in the figure.
Dolby Enabled Speaker (Surround)
Dolby Enabled Speaker (Surround) is specially
designed to be used as a Height speaker. It is to be
placed on the top board of surround speakers as shown
in the figure. Dolby Enabled Speakers placed with their
diaphragms facing toward the ceiling create higher effect in
the Dolby Atmos and Dolby Surround listening modes by
providing sounds echoing off the ceiling.
r
There is integrated type of Dolby Enabled Speakers with
the normal speakers. When using the integrated type
of Dolby Enabled Speakers, place it to the Surround
speakers position.
Change the setting: Press RCV and then HOME on the
remote controller, select "Setup" - "2. Speaker Setup" -
"Speaker Settings" and set "Height Speakers Type" to
"Dolby Enabled Speaker (Surround)" as shown in the
figure.