Advanced Settings
33
Setting Item Default Value Setting Details
Brightness 0 Adjust brightness of the screen. Select a value
between "-50" to "+50".
Contrast 0 Adjust contrast of the screen. Select a value
between "-50" to "+50".
Hue 0 Correct hue of the screen. Select a value between
"-50" to "+50".
Saturation 0 Adjust saturation of the screen. Select a value
between "-50" to "+50".
Color Temperature Normal Set color temperature of the screen. Select from
"Warm", "Normal" and "Cool".
r
In the following cases, the settings for "Picture Adjust" cannot be changed:
– "NET", "USB" or "BLUETOOTH" is selected.
– "1. Input/Output Assign" - "Monitor Out" - "Monitor Out" is set to "SUB".
r
Press CLR on the remote controller if you return all the settings from "Game Mode" through "Color
Temperature" to their default value.
Audio Selector
Make the audio input setting. The setting can be separately set to each input selector
button. Select the input selector to configure.
Setting Item Default Value Setting Details
Audio Selector – Allows you to select prior input source.
"ARC": When giving priority to input signal from
ARC compatible TV.
r
The setting can be selected only when
|*CTFYCTG5GVWR*&/+#WFKQ4GVWTP
Channel" is set to "Auto" and also the "TV/CD"
input is selected.
"HDMI": When giving priority to input signal from
HDMI jacks
r
The setting can be selected only when the
input is assigned to the HDMI IN jack in the
"HDMI Input" setting.
"COAXIAL" (Coaxial input): When giving priority to
input signal from DIGITAL IN COAXIAL jacks.
r
The setting can be selected only when the
input is assigned to the COAXIAL jack in the
"Digital Audio Input" setting.
"OPTICAL" (Optical input): When giving priority to
input signal from DIGITAL IN OPTICAL jacks.
r
The setting can be selected only when the
input is assigned to the OPTICAL jack in the
"Digital Audio Input" setting.
"Analog": To always output analog audio
independently of the input signal
Fixed Mode Off Specify an input signal when "HDMI", "COAXIAL"
or "OPTICAL" is selected for "Audio Selector". Set
this item if noise is produced, or truncation occurs
at the beginning of a track that follows a gap when
playing PCM or DTS sources.
"Off": To play an analog signal when there is no
digital signal.
"PCM": To fix the input source to PCM (except for
multichannel PCM)
"DTS": To fix the input source to DTS (except for
DTS-HD)
r
Changing "Audio Selector" changes the setting
to "Off".
r
The setting cannot be changed when "PHONO", "TUNER", "NET", "USB" or "BLUETOOTH" input is
selected.