Onkyo HT-R993 Stereo Receiver User Manual


 
Advanced Settings
23
1. Input/Output Assign
Monitor Out
The video input signals input to the unit will be converted when they are output from the
HDMI OUT jack to the TV so that their resolution can match that of the TV used.
Setting Item Default Value Setting Details
Monitor Out MAIN Select the HDMI jack to be connected with the
TV.
"MAIN": When connecting the TV to the HDMI
OUT MAIN jack
"SUB": When connecting the TV to the HDMI
OUT SUB jack
r
The resolution of the input signal does not
change when output through HDMI OUT
SUB jack.
"MAIN+SUB": When connecting to both the
MAIN and SUB jacks
r
Video signals input to the composite video
input jack or the COMPONENT VIDEO input
jacks will be upconverted to HDMI signals
and then output from the HDMI output jack.
r
If "MAIN+SUB" is selected
Only "Through" or "Auto" can be selected
in "Resolution".
The resolution of the input signal does not
change when output through HDMI OUT
SUB jack.
r
The HDMI jack of this unit is compliant with
HDCP2.2 (HDMI OUT MAIN and HDMI IN3
jacks only).
Setting Item Default Value Setting Details
Resolution Through Specify the output resolution of the HDMI OUT
jacks. The image resolution of the unit will be
converted so that it can match the resolution
supported by the TV used.
"Through": The output resolution is not
converted and will be the same as that of the
input signals.
"Auto": The resolution will automatically be
converted according to the resolution supported
by the TV.
"480p (480p/576p)", "720p", "1680×720p",
"1080i", "1080p" or "2560×1080p": Select the
desired resolution.
"4K": About four times as high resolution
as 1080p (3840×2160 or 4096×2160 pixels
depending on the resolution supported by the
connected TV)
r
If "1080p" is selected, 1080p/24 input signals
will be output with an unchanged resolution.
r
If the monitor does not support the selected
resolution, the image will be displayed with
the same resolution as that of the input
signal.
r
If "4K" is selected, video signals may not be
output to some types of TV. For details, see
"Resolution supported by HDMI OUT MAIN/
SUB jack" in "Reference Information".
r
If "Monitor Out" is set to "SUB", this setting
will be set to "Through".
r
You can check the video on the TV while
making this setting. Select the value with the
cursors and press ENTER. Press RETURN
if no video is displayed. (except when "NET",
"USB" or "BLUETOOTH" is selected)