Filter
Top Products
Advanced Settings
35
OSD Setup
Make the setting of on-screen display function that can be displayed on the TV when you
use the setting menu or control the volume.
Setting Item Default Value Setting Details
On Screen Display On Set whether or not to display the operation
screen on the TV.
"On": The operation screen will be displayed on
the TV.
"Off": The operation screen will not be displayed
on the TV.
r
The operation screen may not be displayed
depending on the input signal even if "On"
is selected. If the operation screen is not
displayed, change the resolution of the
connected device.
Language English Select the on-screen display language.
Screen Saver 3min Set the time to start the screen saver. Select a
value from "3min", "5min", "10min" and "Off".
7. Hardware Setup
Tuner
Setting Item Default Value Setting Details
AM/FM Frequency
Step (North
American models)
10kHz/200kHz Select a frequency step depending on your
area of residence.
Select "10kHz/200kHz" or "9kHz/50kHz".
r
When this setting is changed, all radio
presets are deleted.
r
Default values vary depending on the
regions.
AM Frequency Step
'WTQRGCP|OQFGNU
9kHz Select a frequency step depending on your
area of residence.
Select "10kHz" or "9kHz".
r
When this setting is changed, all radio
presets are deleted.
r
Default values vary depending on the
regions.
HDMI
Setting Item Default Value Setting Details
HDMI CEC (RIHD) Off Setting to "On" enables the input selection link
and other link functions with HDMI connected
CEC compliant device.
"On": Use this function
"Off": Do not use this function
r
Depending on the TV set, a link may need to
be configured on the TV.
r
This function is effective only when the
device is connected to the HDMI OUT MAIN
terminal.
r
Setting to "On" and closing the on-screen
menu displays the name of the CEC-
compatible components and "RIHD On" on
the display.
r
Power consumption in standby mode may
increase if "On" is set. (Depending on the TV
status, the unit will enter the normal standby
mode.)
r
If you operate the MASTER VOLUME control
on the main unit when this setting is "On"
and audio is output from the TV speakers,
audio will be output also from the speakers
connected to the unit. If you want to output
from only either of them, change the unit or
TV settings, or reduce the volume of the unit.
r
If abnormal operation occurs when you set
the setting to "On", set it to "Off".
r
When connecting a non-CEC compatible
component, or when you are not sure
whether it is compatible, set the setting to
"Off".
r
When changing this setting, turn off and
then on again the power of all connected
components.