Filter
Top Products
Advanced Settings
26
2. Speaker Setup
Allows you to change the speaker configuration such as presence or not of subwoofer,
distance of speakers and so on. Settings are automatically configured if you use the
Automatic Speaker Setup.
This setting cannot be selected if headphones are connected or audio is output from the
speakers of the TV.
Speaker Settings
Change the impedance of the connected speakers, the type of front speaker connection,
and height speaker type.
Setting Item Default Value Setting Details
Speaker
Impedance
(European model)
6ohms Set the impedance of the connected speakers.
"4ohms": When any of the connected speakers have
ŝQTOQTGVQNGUUVJCPŝKORGFCPEG
QJOU9JGPVJGEQPPGEVGFURGCMGTUCNNJCXGŝ
or more impedance
Front Speakers
Type
Normal The type of front speaker connection is fixed to
"Normal". The setting cannot be changed.
Height Speakers
Type
Not Use Set the speaker type if height speakers are
connected to the SPEAKERS BACK or HEIGHT
terminals.
Select from the following options according to the
type and layout of the connected speakers: "Not
Use", "Front High", "Top Front", "Top Middle",
"Dolby Enabled Speaker (Front)" or "Dolby Enabled
Speaker (Surround)".
r
"Dolby Enabled Speaker (Surround)" cannot be
selected if "Speaker Configuration" - "Surround"
is set to "None".
Powered Zone 2 No Set the connection of speakers to Zone 2 speaker
terminals.
"Yes": When speakers are connected to Zone 2
speaker terminals
"No": When speakers are not connected to Zone 2
speaker terminals
r
For impedance, check the indications on the back of the speakers or their instruction manual.
Speaker Configuration
Allows you to change the speaker configuration such as presence or not of each speaker
and so on. Settings are automatically configured if you use the Automatic Speaker Setup.
Audio will not be output while you are making this setting.
Setting Item Default Value Setting Details
Subwoofer Yes Set whether a subwoofer is connected or not.
"Yes": When subwoofer is connected
"No": When subwoofer is not connected
Front Yes The front speaker setting is fixed to "Yes". The
setting cannot be changed.
r
If "Subwoofer" is set to "No", the bass
frequencies of the other channels will be output
from the front speakers.
Center Yes Set whether the center speaker is connected or not.
"Yes": When the center speaker is connected
"No": When the center speaker is not connected
Surround Yes Set whether the surround speaker is connected or
not.
"Yes": When the surround speaker is connected
"No": When the surround speaker is not connected
Back Yes Set whether the surround back speaker is connected
or not.
"Yes": When the surround back speaker is
connected
"No": When the surround back speaker is not
connected
r
In any of the following cases, the setting will be
set to "No".
– "Surround" is set to "No".
– Any type is selected in "Speaker Settings" -
"Height Speakers Type".
– "Speaker Settings" - "Powered Zone 2" is set
to "Yes" and also Zone2 is set to on.
Back ch 2ch Select the number of channels of the connected
surround back speaker.
"1ch": When one speaker is connected (Connect to
the BACK or HEIGHT L terminal)
"2ch": When two speakers are connected
r
The setting cannot be changed if "Back" is set to
"No".