Filter
Top Products
Advanced Settings
34
5. Listening Mode Preset
You can preset your favorite listening mode to each input. (For example, you can always
apply straight decode to the Dolby TrueHD source of Blu-ray Disc to play it in unchanged
sound field.)
When the list of input sources is displayed, set the signal type and listening mode.
Although it is possible to select the listening mode during playback, the selected mode will
be reset when the unit enters standby mode.
Setting Item Default Value Setting Details
Analog/PCM Last Valid Set the listening mode for playing PCM signals
of CD and analog signals of record and cassette
tape.
Mono/Multiplex
Source
Last Valid Set the listening mode for playing Dolby Digital
and other digital signals recorded in monaural or
multiplex audio.
2 ch Source Last Valid Set the listening mode for playing Dolby Digital
and other digital signals recorded in 2 channels.
Dolby D/Dolby
D Plus/TrueHD
Last Valid Set the listening mode for playing Dolby Digital,
Dolby Digital Plus and Dolby TrueHD signals.
DTS/DTS-ES/DTS-
HD
Last Valid Set the listening mode for playing digital audio
signals in DTS and DTS-HD High Resolution
formats. Select the listening mode specified for
Blu-ray or such other DTS-HD Master Audio
source.
Other Multich
Source
Last Valid Set the listening mode for playing DSD signals of
Super Audio CD etc. that are input from HDMI IN
jack.
r
Available listening modes vary depending on the input signal.
r
Setting "Last Valid" will always select the last selected mode.
r
Only "Analog" can be set to the "TUNER" input.
r
"Digital" and "TrueHD" can be set to the "NET" and "USB" inputs.
r
Only "Digital" can be set to the "BLUETOOTH" input.
6. Miscellaneous
Volume Setup
Make the detailed volume setting of the unit.
Setting Item Default Value Setting Details
Volume Display Absolute Switch the volume display between the absolute
value and relative value. The absolute value 82
is equivalent to the relative value 0 dB.
"Absolute": Absolute value such as "1" to "99"
"Relative (THX)": Relative value such as
"-81dB" and "+18dB"
r
If you set the volume of absolute value to
"82", "82Ref" appears and "THX" flashes on
the display.
Muting Level ŬF$ Set the volume lowered from the listening
volume when muting is on.
5GNGEVCXCNWGHTQOŬF$F$VQF$
(in 10dB increments)
Maximum Volume Off Set the maximum value to avoid too high
volume. Select a value from "Off", "50" to "99".
Power On Volume Last Set the volume level of when the power is
turned on. Select a value from "Last" (Volume
level before entering standby mode), "Min", "1"
to "99" and "Max".
r
You cannot set a higher value than that of
"Maximum Volume".
Headphone Level 0dB Adjust the volume level difference between
speakers and headphones. Select a value
between "-12dB" to "+12dB".