Filter
Top Products
57NILES AUDIO CORPORATION – 1-800-BUY-HIFI – 305-238-4373
SYSTEM SETTINGS
SETTING UP THE ZONE KEYPADS
CUSTOM IMAGE DISPLAY
The idle time (the length of time after the last key press) before
the custom image is shown can be adjusted in Custom Image
Display.
1. Adjust the Custom Image Display with the + key and
the – key (5-60 seconds).
2. Press the box to the
left of Hide Custom
Image to always hide
the custom image.
A checkmark will
appear in the box.
When the box is
checked, the custom
image will never be displayed.
NOTE: IT IS POSSIBLE TO SET THE BACKLIGHT TIMER TO TURN OFF
BEFORE THE CUSTOM IMAGE IS SHOWN. IN THIS CASE, THE CUSTOM
IMAGE WILL NEVER BE SHOWN.
VIRTUAL ROOM TIMEOUT
A TS-Pro can control any room in the system, but will revert
back to its default room after a preset length of time.
1. Adjust the Virtual
Room Timeout with
the + and – keys
(10-240 seconds).
RADIO PRESET NAMES
Any preset radio station can be custom named by station name, call
letters, genre, etc. Once a custom name is created, it automatically
appears on all other TS-Pro touchscreens in the system.
1. Press-and-hold the Niles Key for three seconds.
2. Select Radio Preset Names; the Setup Radio Preset
Names menu will be displayed with all preset radio stations,
their station frequency numbers, preset numbers, and if
previously entered, custom names.
3. Find the radio preset station you wish to name. Use the Up
and Down arrows to scroll to more stations.
4. Press the radio preset
station. A keyboard with
capital letters will be
displayed. Select abc to
toggle to lower case letters.
From the lower case letter
keyboard, select ?123 to
toggle to numerals.
5. Enter the desired radio preset
name (up to 10 characters).
You can delete a character or
number by pressing the
key or delete an entire name
by pressing and holding the
key.
6. Press Save.
7. Press Back and repeat steps 3-6 to create another custom
name.
8. When done, press Exit. The ZR-6 MultiZone Receiver
will shut down for approximately 5 seconds, restart,
and automatically transmit the new names to all TS-Pro
touchscreens in the system.
SAVING A PRESET RADIO STATION
1. With the system on, press the Radio Source Select key.
2. Press the Tune key. The tuning screen is displayed.
3. Tune in the desired station and then press Add Preset.
4. Select a location for the preset station. There are 20 preset
station locations. Use the
Up and Down arrows to
scroll to an unused location
or scroll to an existing
preset station you would
like to replace. Press the
unused location or the
existing preset station. The
new station will appear in
this location.
5. Press the Tune key to enter
another preset station or
press the Main key to return
to the “Radio Now Playing”
screen.