Filter
Top Products
NILES AUDIO CORPORATION – 1-800-BUY-HIFI – 305-238-437334
SYSTEM INSTALLATION
TOUCHSCREEN INSTALLATION
TS-PRO
Determine the best mounting location for the TS-Pro, taking into account the framing, electrical
wiring, fi xtures, and any mechanical limitations present in the stud space. Make sure the area behind
the TS-Pro is at least 3" deep and clear of any obstructions.
The TS-Pro touchscreen is designed to provide the best screen resolution when installed at a
mounting height of 60" on-center.
1. Use the supplied template to cut a hole in the wall. For new construction, a New Construction
Bracket (FG01603) is available.
2. Connect the wiring and then position the TS-Pro touchscreen in place. When lined up and
level, clamp the top and bottom dog-ears using the front panel screws.
3. Snap the faceplate in place.
60"
Keypad height installation
guideline.
New Construction
Bracket
TS-PRO
Faceplate
ADDING AN EXTERNAL IR SENSOR TO A TS-PRO
To connect an external IR sensor, use the included RJ-45 utility adapter. Connect the external sensor as shown in the fi gure below.
RJ-45
Utility
Adapter
Utility Adapter
Yellow
Data
White
Status
Black
Ground
Red
12V+
MS220
System
Connection