Filter
Top Products
NILES AUDIO CORPORATION – 1-800-BUY-HIFI – 305-238-437354
SYSTEM SETTINGS
Press the Play/Pause/Select key to select the
highlighted menu option.
3. Press the Exit soft key to return to the previous mode.
AUDIO SETTINGS
A source device should be playing in the zone. To adjust the
Audio Settings:
1. Select “Audio
Settings” from the
main setup menu.
The audio settings
menu will appear on
the screen. The Back
soft key returns to
the previous menu.
The Exit soft key exits all setup menus and returns to
the “Now Playing” screen.
2. Press the Vol + and Vol – keys to scroll through
the menu options and highlight the desired function:
“Treble,” “Bass,” or “Loudness.”
3. When “Treble” or “Bass” are highlighted, adjust the
respective level using the < and > keys. The current
level is indicated by the sliding bar graph. Press the
Default soft key to reset the highlighted tone control to
its center, neutral setting.
4. When “Loudness” is highlighted, toggle between on
or off with the < and > keys. The default setting for
loudness is on.
DISPLAY SETTINGS
The keypad display’s backlight will turn off after the elapsed
time selected in this confi guration menu. However, the keypad
buttons are always active, even when the backlight is off.
Pressing any key activates the backlight, restarts the timeout
clock, and performs the selected function. To enter the Display
Settings mode:
1. Select “Display Settings” from the main setup menu.
The display settings menu will appear on the screen.
The Back soft key returns to the previous menu. The
Exit soft key exits all setup menus and returns to the
“Now Playing” screen.
2. Press the Vol + and Vol – keys to scroll through
the menu options and highlight the desired function:
“Contrast” or “Backlight Timeout.”
3. When “Contrast” is
highlighted, adjust the
respective level using
the < and > keys.
The current level is
indicated by the sliding
bar graph.
4. When “Backlight
Timeout” is
highlighted, adjust
the time that the
backlight stays on
after any keypad
activity in 10-second
increments. The >
key increases the
time. The < key
decreases the time. A timeout setting of “0” means the
backlight will always be on. “Always On” will appear in
the screen. The maximum backlight timeout setting is
240 seconds (4 minutes).
5. The Niles key selects the last played source when the
backlight is off and the zone is off. If the backlight never
turns off, the feature is disabled.
KEYPAD CONFIGURATION
The Solo-6MD features a confi guration menu that accesses
advanced settings usually performed at the time of installation.
To enter the keypad confi guration mode:
1. Press-and-hold the
Niles logo soft key
(the middle key
below the display)
for approximately 10
seconds or until the
Confi guration screen
appears.
Release the button when the confi guration screen appears.
SETTING UP THE ZONE KEYPADS