Filter
Top Products
44
How to Operate the MVP871, con’t
SACD and CD Disc Program Playback Mode
This feature allows for the playback of Tracks of SACD and
CD Discs in the desired order. Refer to figure 78.
Notes: 1. The MVP871 must be in full STOP Mode (two presses
of the
STOP
Push-but-
ton) with
the Disc
Table of
Contents
(TOC)
read
before the
Program
Playback
Mode Fea
-
ture can be activated.
2. When programming Hybrid SACD Discs, first choose
the format (Multichannel, Stereo or CD) so the correct
TOC can be read as some discs have different selec
-
tions.
1. Press the PGM (Program) Push-button to access the On-
Screen Program Mode.
Note: It is possible to enter a Program using just the Front
Panel Alphanumeric Display; however the On-
Screen Icon Display allows viewing of the whole
program at one time.
2. Using the Numeric Push-buttons enter the desired Track
Selection for the first Program Step.
Note: The MVP871 automatically stores into memory
each of the program steps as they are entered.
3. In a similar manner, enter the remaining desired Tracks.
Note: The CLEAR Push-button may be used to delete a
selected Program Step.
4. To start playback of the just entered program press the
PLAY Push-button.
Note: To momentarily stop playback press either the
Pause
Push-button or the STOP Push-but-
ton once. To resume Program Playback press the
PLAY Push-button.
5. To cancel the Program Playback Mode press the
STOP
Push-button twice followed by pressing the
PGM (Program) Push-button.
DVD-Audio Disc Program Playback Mode
This feature allows for the playback of pre-selected Groups
and/or Tracks of a DVD-Audio Disc in the desired order.
Refer to figure 79.
Notes: 1. The MVP871 must be in full STOP Mode (two presses
of the STOP Push-button) with the Disc Table of
Contents
(TOC)
read
before the
Program
Playback
Mode Fea
-
ture can be
acti
vated.
2. If a DVD-
Audio disc
has both
formats
(DVD-Audio and DVD-Music Video), only the DVD-
Audio Groups/Tracks are programmable.
1. Press the PGM (Program) Push-button to access the
On-Screen Program Mode.
2. Use the the Up or Down directional Push-buttons
to select the first desired Group followed by the SE
-
LECT Push-button. Use the the Up or Down direc-
tional Push-buttons to select the first desired Track of
the previous selected Group.
Note: The MVP871 automatically stores into memory
each of the program steps as they are entered.
3. In a similar manner, add any additional Groups/Tracks.
Note: To remove a given Group/Track Program Step use
the Right
Push-button followed by the Up or
Down
directional Push-buttons to select the Pro-
gram Step to be removed. Then press the CLEAR
Push-button to delete it.
4. To start playback of the just entered program press the
PLAY Push-button.
Note: To momentarily stop playback press either the
Pause
Push-button or the STOP Push-but-
ton once. To resume Program Playback press the
PLAY Push-button.
5. To cancel the Program Playback Mode press the
STOP Push-button twice followed by pressing the
PGM (Program) Push-button.
Reset of Microprocessors
In the unlikely event the controls of the MVP871 stop
functioning, the microprocessors can be reset by perform
-
ing the following:
1. Press and hold in the STANDBY/ON Push-button
until the STANDBY/ON LED is no longer illumi-
nated. Then release the STANDBY/ON Push-but
-
ton.
Note: This can be performed with the MVP871 On or
in the Standby Mode.
2. The MVP871 will automatically switch On and
normal operation will resume.
Figure 78
Figure 79