Filter
Top Products
35
3. Using the NUMERIC Push-buttons on the Remote
Control, enter the default password “0000” followed by
SELECT Pushbutton. Refer to figure 57.
4. Return to the
Rating Menu
by pressing the
Up direction-
al Push-button.
6. Next continue
to the PASS-
WORD Set-
tings. If no
other changes
are to be made
in Setup Mode
at this time, exit by pressing the RTRN (Return) Push-
button.
Note: The SETUP Push-button may be also pressed to
exit the setup mode.
Password
The Password of 0000 used in the previous Rating Level
example or any other previously entered password may
be changed at any time. To change the current password
perform the following steps:
1. Press the SETUP Push-button on the supplied Remote
Control to access the Language Setup Menu. Then
press the Right directional Push-button to select the
Ratings Menu Icon Tab. Refer to figure 55.
Note: If there is a Disc playing in the MVP871 press
the STOP Push-button twice before pressing the
SETUP Push-button.
2. Use the Down directional Push-button on the Re-
mote Control to select the PASSWORD Menu. Refer to
figure 58.
3. Use the Right
directional
Push-button
followed by the
SELECT Push-
button. Then
enter using the
Numeric Push-
buttons on the
Remote Control
the current
password “0000”, followed by the SELECT Push-but-
ton. Refer to figure 59 on the next page.
SETUP, con’t
How to Set the Ratings
Rating Level
Some DVD Movie discs have encoded rating levels that al-
low setting the MVP871 to prevent children from viewing
inappropriate movies in your absence. A password protect-
ed lock function, set by you, determines the rating limit for
disc playback. In the example below the default setting of
No Limit Rating Level will be changed to Level 3.
Note: A Rating Level of 8 allows viewing of all DVD Movies
and a Level of 1 plays movies suitable for children. It is
advisable to write down the password for future refer-
ence, as once a password has been entered it will stay
in effect until removed or changed.
1. Press the SETUP Push-button on the supplied Remote
Control to access the Language Setup Menu. Then
press the Right directional Push-button to select the
Ratings Menu Icon Tab. Refer to figures 54 and 55.
Note: If there
is a Disc
playing
in the
MVP871
press
the
STOP
Push-
button
twice
before
press-
ing the
SETUP
Push-
button.
2. Use the
Down direc-
tional Push-
button on the
Remote Con-
trol to select
the RATING
LEVEL Menu.
Refer to figure
56.
3. Select the
desired rating
level of 3 by
using the Up
or Down
directional
Push-buttons
followed by the
SELECT Push-button.
Figure 55
Figure 56
Figure 58
Figure 57
Figure 54