Filter
Top Products
43
SACD or CD Repeat
This allows repeating a SACD/CD Track or the Disc on a
continuous basis. Refer to figure 77.
1. Start playing the disc or the part of the disc you desire
to have repeated.
2. Press the RPT (Repeat) Push-button once to activate
the Track Repeat (1); press the RPT Push-button twice
to activate the Disc Repeat (All). Refer to the On-
Screen Text.
3. To cancel the previously selected Repeat Mode, press
the RPT (Repeat) Push-button until the On-Screen
Text message indicates “REPEAT Off” or the word
“REPEAT” in the lower right hand corner of the Front
Panel Alphanumeric Display is extinguished.
Disc A-B Repeat
This feature allows the repeating of a specific disc segment
on a continuous basis. Refer to figure 77.
1. Start playing the part of the disc you desire to have
repeated.
2. Press the A-B Push-button once to enter the A (starting
point) and press the same push-button a second time B
(ending point). Refer to the On-Screen Text.
3. To cancel A-B REPEAT function press the A-B
Push-button once again. The On-Screen Text message
indicates “A to B CANCELED”.
Random Playback
This feature allows for listening to Tracks of a SACD or
CD Disc in a Random Order. It also allows for the play
-
back of Tracks in a Group on a DVD-Audio Disc in ran-
dom order. Refer to figure 77.
Note: The MVP871 must be in STOP Mode with the Disc
Loaded (Table of Contents) read first before the Ran-
dom Playback Mode Feature can be activated.
1. After the Table of Contents has been read with the
transport in the full stop mode (press the Stop Push-
button Twice), press the RANDOM Push-button.
2. Press the PLAY Push-button to start Random Play-
back, after all the tracks have been played the MVP871
will stop.
3. To cancel the Random Playback function first press
the STOP Push-button twice followed by RANDOM
Push-button.
rectional Push-buttons to highlight the second dot from
the end of the left side. Press the SELECT Push-button
to enter the second starting location.
4. Enter a third starting point if desired. Up to eight
Markers can be stored in memory.
Note: If you wish to erase a MARKER, use the Left
or Right directional Push-buttons to select the
desired Marker and press the CLEAR push-button.
To start playback from a desired Marker Location perform
the following steps:
1. Press the MRKR (Marker) Push-button to select the
Marker On-Screen Icon, if not already displayed On-
Screen.
2. Using the Left or Right directional Push-buttons to
select the desired Marker Starting Location, then press
the SELECT Push-button.
3. Press the MRKR (Marker) Push-button to exit the
Marker On-Screen Icon.
DVD-Video Repeat
This allows repeating a DVD Chapter or the Title (the en
-
tire movie) on a continuous basis. Refer to figure 77.
1. Start playing the disc or the part of the disc you desire
to have repeated.
2. Press the RPT (Repeat) Push-button once to activate
the Chapter Repeat (1); press the RPT Push-button
twice to activate the Title Repeat (All). Refer to the
On-Screen Text Message.
3. To cancel the previously selected Repeat Mode, press
the RPT (Repeat) Push-button until the On-Screen
Text Message indicates “REPEAT Off” or the word
“REPEAT” in the lower right hand corner of the Front
Panel Alphanumeric Display is extinguished.
DVD-Audio Repeat
This allows repeating a DVD Track or the Group (a selec
-
tion of tracks) on a continuous basis. Refer to figure 77.
1. Start playing the disc or the part of the disc you desire
to have repeated.
2. Press the RPT (Repeat) Push-button once to activate
the Track Repeat (1); press the RPT Push-button twice
to activate the Group Repeat (All). Refer to the On-
Screen Text Message.
3. To cancel the previously selected Repeat Mode, press
the RPT (Repeat) Push-button
until the On-Screen Text Message
indicates “REPEAT Off”.
How to Operate the MVP871, con’t
Figure 77