Filter
Top Products
34
How to Set the Audio, con’t
2. Use the Down directional Push-button followed by
the Right directional Push-button on the Remote
Control to
select SOURCE
DIRECT. Refer
to figure 51.
3. Use the Right
directional
Push-button
followed by
the Up or
Down direc-
tional Push-but-
tons to select
either the 50kHz or 100kHz setting. Then press the
SELECT Push-button.
4. Next continue to the BASS ENHANCER Setup Menu
item. If no other changes are to be made in Setup
Mode at this time, exit by pressing the RTRN (Return)
Push-button.
Note: The SETUP Push-button may be also pressed to
exit the setup mode.
Bass Enhancer
The MVP871 Bass Enhancer redirects low frequency
sounds to the Subwoofer when a two channel audio source
or other source without Low Frequency Effects (LFE) is
playing. The Subwoofer needs to be active, refer to Loud-
speaker Configuration on page 30. The defaut setting for
Bass Enhancer is Off, to activate the Bass Enhancer Direct
feature perform the following:
1. Press the SETUP Push-button on the supplied Re-
mote Control
to access the
On-Screen
Language
Setup Menu.
Then press the
Right direc-
tional Push-but-
ton to select the
Audio Setup
Tab.
Note: If there
is a Disc
playing in the MVP871, press the STOP Push-but-
ton twice before pressing the SETUP Push-button.
2. Use the Down directional Push-button followed by
the Right directional Push-button on the Remote
Control to select BASS ENHANCER. Refer to figure
52.
Figure 51
Figure 52
3. Use the Right directional Push-button followed by
the Up or Down directional Push-buttons to select
the ON setting. Then press the SELECT Push-button.
4. Next continue to the COMPRESSION Setup Menu
item. If no other changes are to be made in Setup
Mode at this time, exit by pressing the RTRN (Return)
Push-button.
Note: The SETUP Push-button may be also pressed to
exit the setup mode.
Compression
Watching a movie with a wide dynamic range late at night
could disturb others not viewing the movie. The MVP871
Compression feature reduces the dynamic range, allowing
enjoyment of the movie without disturbing others. Select
the Dolby Digital Sound Track (DVD Disc Menus) and to
activate the Compression feature perform the following:
1. Press the SETUP Push-button on the supplied Remote
Control to access the On-Screen Language Setup
Menu. Then press the Right directional Push-button
to select the Audio Setup Tab.
Note: If there is a Disc playing in the MVP871, press
the STOP Push-button twice before pressing the
SETUP Push-button.
2. Use the Down directional Push-button followed by
the Right directional Push-button on the Remote
Control to select COMPRESSION. Refer to figure 53.
3. Use the Right
directional
Push-button
followed by
the Up or
Down direc-
tional Push-but-
tons to select
the ON setting.
Then press the
SELECT Push-
button.
4. Next continue to the RATINGS Setup Menu item. If
no other changes are to be made in Setup Mode at this
time, exit by pressing the RTRN (Return) Push-button.
Note: The SETUP Push-button may be also pressed to
exit the setup mode.
Figure 53