Filter
Top Products
11
How to Connect Control, Analog and Digital Audio
How to Connect Control, Analog and Digital
Audio
McIntosh A/V Control Center
1. Connect a Power Control Cable from the MVP871
POWER CONTROL IN to the POWER CONTROL
ACC Output jack of a McIntosh A/V Control Center.
2. Connect a Data Cable from the MVP871 DATA IN
jack to the DVD DATA jack on the McIntosh A/V
Control Center.
3. Connect a Coaxial Cable from the MVP871 DIGITAL
AUDIO COAXIAL OUTPUT to the DVD Coaxial
DIGITAL INPUT of a McIntosh A/V Control Center.
Note: An optional connecting method is to use an optical
cable from the MVP871 DIGITAL AUDIO OPTI-
CAL OUTPUT to the Optical Digital Input of a
McIntosh A/V Control Center.
4. Connect Audio Cables from the MVP871 UNBAL-
ANCED 2CH AUDIO OUTPUTS to the DVD Inputs
on a McIntosh A/V Control Center.
5. Optionally connect Audio Cables from the MVP871
BALANCED 2CH AUDIO OUTPUTS to the Zone A
Balanced 1 Inputs on a McIntosh A/V Control Center.
6. Connect Audio Cables from the MVP871 UNBAL-
ANCED 5.1CH AUDIO OUTPUTS (all six channels)
to the External AUDIO INPUTS on a McIntosh A/V
Control Center.