Filter
Top Products
iCOM
Control Training and Service Manual
iCOM Control Board DIP Switch #2 Settings
Connector Input/ Output Type Setting
P7-1 (+)/ P7-2 (-) NTC Thermistor * Software (ASW1 = 1)
PTC Thermistor Software (ASW1 = 0)
P11-1 (+)/ P11-2 (-) Analog Voltage: 0 to +10V * Sw2-1: Off/ Sw2-2: Off
Analog Voltage: 0 to +5V Sw2-1: On/ Sw2-2: Off
Analog Current: 4 to 20mA Sw2-1: On/ Sw2-2: On
P11-3 (+)/ P11-4 (-) +5V Output None
P11-5 (+)/ P11-6 (-) Analog Voltage: 0 to +10V * Sw2-3: Off/ Sw2-4: Off
Analog Voltage: 0 to +5V Sw2-3: On/ Sw2-4: Off
Analog Current: 4 to 20mA Sw2-3: On/ Sw2-4: On
P11-7 (+)/ P11-8 (-) +5V Output None
P12-1 (+)/ P12-2 (-) Analog Voltage: 0 to +10V * Sw2-5: Off/ Sw2-6: Off
Analog Voltage: 0 to +5V Sw2-5: On/ Sw2-6: Off
Analog Current: 4 to 20mA Sw2-5: On/ Sw2-6: On
P12-3 (+)/ P12-4 (-) +5V Output None
P12-5 (+)/ P12-6 (-) Analog Voltage: 0 to +10V * Sw2-7: Off/ Sw2-8: Off
Analog Voltage: 0 to +5V Sw2-7: On/ Sw2-8: Off
Analog Current: 4 to 20mA Sw2-7: On/ Sw2-8: On
P12-7 (+)/ P12-8 (-) +5V Output None
P13-1 (+)/ P13-2 (-) NTC Thermistor * Software (ASW2 = 1)
PTC Thermistor Software (ASW2 = 0)
P13-3 (+)/ P13-4 (-) NTC Thermistor Sw2-9: On
NTC Scroll Thermister * Sw2-9: Off
P13-5 (+)/ P13-6 (-) NTC Thermistor Sw2-10: On
NTC Scroll Thermister * Sw2-10: Off
* Default Setting
103