Filter
Top Products
BASS -6.0 to +6.0dB
Controls the amount of low-frequency boost or cut applied to the
Main Zone audio output connectors labeled Front L/R, Center, and
Subwoofer. The graph shown on the left of the next page illustrates
the frequency response of BASS parameter settings.
TREBLE -6.0 to +6.0dB
Controls the amount of boost or cut applied to the Main Zone
audio output connectors labeled Front L/R and Center. The graph
shown on the right of the next page illustrates the frequency
response of TREBLE parameter settings.
TREBLE
AUDIO CONTROLS
BASS
AUDIO CONTROLS
Default Possible
Parameter Value Settings
BASS +0.0dB -6.0 to +6.0dB
TREBLE +0.0dB -6.0 to +6.0dB
TILT EQ +0.0dB -3.0 to +3.0dB
LOUDNESS ON ON, OFF
BALANCE <|> L< to <|> to >R
FADER <|> B< to <|> to >F
ZONE2 BALANCE <|> L< to <|> to >R
AUDIO CONTROLS menu parameter descriptions begin in the next column.
Note:
When the Zone 2 command bank is activated,
pressing the remote control Blue button sets the
BASS, TREBLE, and TILT EQ parameters to +0.0dB.
AUDIO CONTROLS
JBL Synthesis
4-2
AUDIO CONTROLS
Selecting the MAIN MENU AUDIO CONTROLS option opens the AUDIO CONTROLS menu shown below, which can be used to customize the
Main Zone audio output connectors and control the balance of the Zone 2 audio output connectors. The BASS, TREBLE, TILT EQ, LOUDNESS,
BALANCE, and FADER parameters affect the Main Zone audio output connectors. These parameter settings affect all inputs and listening modes
selected in the Main Zone, except the 5.1a BYPASS and 2CH BYPASS listening modes. The ZONE2 BALANCE parameter controls the balance
of the Zone 2 audio output connectors. This parameter setting affects all inputs selected in Zone 2.
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
AUDIO CONTROLS
AUDIO CONTROLS
BASS +0.0dB
TREBLE +0.0dB
TILT EQ +0.0dB
LOUDNESS ON
BALANCE <|>
FADER <|>
ZONE2 BALANCE <|>
-6.0 to +6.0dB
BASS +0.0dB
TREBLE +0.0dB