Filter
Top Products
Basic Operation
JBL Synthesis
2-10
To select the desired setting on a parameter drop-down menu:
1. When the drop-down menu opens, press the remote control
Menu and arrows to scroll upward and downward
through the complete list of available settings. The current
setting appears beneath the parameter name on the on-screen
and front panel displays.
2. When the desired setting appears beneath the parameter
name, press the Menu arrow to select the setting and close
the drop-down menu.
Horizontal Bar Graphs
Selecting some menu parameters opens a horizontal bar graph,
which indicates the position at which the current parameter setting
falls within the entire parameter range. The current setting appears
at the right of the parameter name on the on-screen and front
panel displays.
For instance, selecting the DISPLAY SETUP menu A/V SYNC DELAY
parameter opens the horizontal bar graph shown below, which can
be used to adjust the amount of audio delay.
To adjust a parameter setting with a horizontal bar graph:
1. When the horizontal bar graph appears, press the remote
control Menu and arrows to increase and decrease the
setting in designated increments. The current setting appears
at the right of the parameter name on the on-screen and front
panel displays.
2. When the desired adjustments have been made, press the
Menu arrow to select the setting and close the horizontal
bar graph.
Note:
Menu item selection instructions differ for certain
menus. These instances are noted throughout this
user guide.
OFF, 1 to 60ms
DISPLAY SETUP
ON-SCREEN DISPLAY
FRONT PANEL DISPLAY
A/V SYNC DELAY OFF
CUSTOM NAME OFF
EDIT CUSTOM NAME
A/V SYNC DELAY OFF