Filter
Top Products
SETUP
JBL Synthesis
3-20
2-CH ANLG BYP ON, OFF
Allows 2-channel analog audio input sources to bypass A/D
conversion and internal processing. When set to ON, the SDP-5
passes analog audio input signals to the corresponding Main Zone
audio output connectors. When a 5.1-channel analog audio source
is present, the SDP-5 passes only (L) and (R) analog audio input
signals to the Main Zone audio output connectors labeled Front
L/R. When set to OFF, all analog audio input signals are sent
through A/D conversion and internal processing before passing to
the Main Zone audio output connectors.
Note:
When the Shift command bank is activated, pressing
the remote control 2 CH button toggles the 2-CH
ANLG BYP parameter setting ON and OFF.
2-CH ANLG BYP
MAIN ADVANCED
DVD1
INPUTS
SETUP
MAIN ADVANCED (continued from page 3-19)
DVD1 INPUT SETUP
NAME DVD1
DIGITAL IN COAX-1
ANALOG IN NONE
ANLG IN LVL +0dB
VIDEO IN S-VIDEO-1
COMPONENT IN 1
2-CH L7 FILM
%!D 5.1 L7 FILM
DTS-ES DTS-ES L7 FILM
MAIN ADVANCED
ZONE2 IN DIGITAL
MAIN ADVANCED
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
SETUP
SETUP
INPUTS
SPEAKERS
REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGER
LOCK OPTIONS
INPUT SETUP
DVD1
DVD2
SAT
VCR
TV
CD
TUNER
AUX
INPUTS DVD1
The DVD1 INPUT SETUP menu is shown here as an example, and will continue to be shown as an example throughout this section. Whenever it appears, any other INPUT SETUP menu
may be substituted. Likewise, whenever the DVD1 input appears as a step in a menu path, any other input may be substituted.
DVD1 MAIN ADV
INPUT SELECT DIGITAL
ANALOG BYPASS OFF
S-VIDEO 16:9 AUTO
S-VIDEO OSD 4:3 ON
COMPONENT OSD OFF
2-CH ANLG BYP OFF
ON
OFF