Filter
Top Products
SETUP
JBL Synthesis
3-22
Note:
The on-screen display appears horizontally stretched
across the display device screen when all of the fol-
lowing conditions are met:
• The S-VIDEO OSD (4:3) parameter is set to OFF.
• An anamorphic video input signal is present.
•A 16:9 display device (widescreen) is connected
to an S-video output connector.
S-VIDEO OSD 4:3 ON, OFF
Controls the appearance of the on-screen display when the display
device is connected to an S-video output connector. When set to
ON, the display device shows the on-screen display in a 4:3 aspect
ratio* regardless of the incoming signal. When set to OFF, the
display device shows the on-screen display in the same aspect ratio
as the input signal.
* Aspect ratio refers to the size of the picture on the display device
screen or to the size of the display device screen. A 4:3 aspect ratio
is almost square. A 16:9 aspect ratio, often referred to as
“widescreen,” is almost twice as wide as high.
S-VIDEO OSD 4:3
MAIN ADVANCED
DVD1
INPUTS
SETUP
DVD1 INPUT SETUP
NAME DVD1
DIGITAL IN COAX-1
ANALOG IN NONE
ANLG IN LVL +0dB
VIDEO IN S-VIDEO-1
COMPONENT IN 1
2-CH L7 FILM
%!D 5.1 L7 FILM
DTS-ES DTS-ES L7 FILM
MAIN ADVANCED
ZONE2 IN DIGITAL
MAIN ADVANCED
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
SETUP
SETUP
INPUTS
SPEAKERS
REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGER
LOCK OPTIONS
INPUT SETUP
DVD1
DVD2
SAT
VCR
TV
CD
TUNER
AUX
INPUTS DVD1
The DVD1 INPUT SETUP menu is shown here as an example, and will continue to be shown as an example throughout this section. Whenever it appears, any other INPUT SETUP menu
may be substituted. Likewise, whenever the DVD1 input appears as a step in a menu path, any other input may be substituted.
DVD1 MAIN ADV
INPUT SELECT DIGITAL
2-CH ANLG BYP OFF
S-VIDEO 16:9 AUTO
S-VIDEO OSD 4:3 ON
COMPONENT OSD OFF
S-VIDEO OSD 4:3 ON
ON
OFF
MAIN ADVANCED (continued from page 3-21)