JBL 201 Home Theater System User Manual


 
Basic Operation
SDP-5
2-11
COMMAND BANK ACTIVATION
Remote control buttons perform different commands depending
on whether the Main Zone, Zone 2, or Shift command bank is
activated. The Main Zone command bank does not need to be
activated. It remains activated unless the Zone 2 or Shift command
bank is activated. Pressing and holding the remote control Zone 2
button activates the Zone 2 command bank, and pressing and
holding the remote control Shift button activates the Shift
command bank.
The Zone 2 and Shift buttons themselves do not send commands
to the SDP-5. When pressed and held, these buttons activate the
associated command bank. For instance, pressing the remote
control Off button deactivates the SDP-5. Pressing and holding the
Zone 2 button while pressing the Off button deactivates Zone 2.
And, pressing and holding the Shift button while pressing the Off
button deactivates the Main Zone.
To activate the Zone 2 or Shift command bank:
1. Press and hold the remote control Zone 2 button to activate
the Zone 2 command bank or press and hold the Shift button
to activate the Shift command bank.
2. While holding the selected button, press the desired remote
control button to send the associated command to the SDP-5.
The command matrix that begins on the next page describes
the commands remote control buttons perform when each
command bank is active.
3. Release the Zone 2 or Shift button to deactivate the associated
command bank.
The ON-SCREEN DISPLAY menu REMOTE STATE parameter (3-51)
controls the remote control command bank indicator that appears
on the on-screen display. When the REMOTE STATE parameter is set
to ON, a command bank indicator appears in the top-right corner
of the on-screen display to indicate the last command bank from
which the SDP-5 received a command. When the REMOTE STATE
parameter is set to OFF, no command bank indicator appears on
the on-screen display.
A "Z" appears when a command from the Zone 2 command bank
was received last. An "S" appears when a command from the Shift
command bank was received last. No letter appears when a
command from the Main Zone command bank was received last.
COMMAND MATRIX
The command matrix that begins on the next page describes the
commands remote control buttons perform when each command
bank is active. The numbers in the SDP-5 remote control illustrations
that also begin on the next page correspond to the numbered
items in the matrix.