Filter
Top Products
SETUP
SDP-5
3-9
ANLG IN LVL
Opens the ANLG IN LVL menu shown above, which can be used to
adjust 2-channel analog audio input levels for the selected input.
Despite attempts at standardization, analog audio sources have a
wide range of levels. To compensate for this, the SDP-5 allows
independent input level adjustment for each of its stereo analog
audio input connectors. Input level adjustment is not available
for either of the 5.1-channel analog audio input connectors.
Note:
Adjustments made on the ANLG IN LVL menu are
applied to the stereo analog audio input connector
assigned for the selected input. When another stereo
analog audio input connector is assigned, these
adjustments are automatically applied to the new
connector.
ANLG IN LVL
DVD1
INPUTS
SETUP
AUTO ON, OFF
Provides automatic adjustment of 2-channel analog audio input
levels. When set to ON, the SDP-5 automatically monitors and
optimizes input levels. When the input signal is too high, the SDP-5
quickly decreases input levels to avoid overload. When the input
signal is too low, the SDP-5 slowly increases input levels to maximize
the signal-to-noise ratio and dynamic range.
When the AUTO parameter is set to OFF, the SDP-5 does not
provide automatic adjustment of 2-channel analog audio input
levels. Rather, input levels must be adjusted with the ANLG IN LVL
MANUAL parameter (next page).
. . . Assigning Audio & Video Input Connectors continues on page 3-10
AUTO
ANLG IN LVL
DVD1
INPUTS
SETUP
DVD1 INPUT SETUP
NAME DVD1
DIGITAL IN COAX-1
ANALOG IN NONE
ANLG IN LVL AUTO
VIDEO IN S-VIDEO-1
COMPONENT IN 1
2-CH L7 FILM
%!D 5.1 L7 FILM
DTS-ES DTS-ES L7 FILM
MAIN ADVANCED
ZONE2 IN DIGITAL
ANLG IN LVL +0dB
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
SETUP
SETUP
INPUTS
SPEAKERS
REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGER
LOCK OPTIONS
INPUT SETUP
DVD1
DVD2
SAT
VCR
TV
CD
TUNER
AUX
INPUTS DVD1
The DVD1 INPUT SETUP menu is shown here as an example, and will continue to be shown as an example throughout this section. Whenever it appears, any other INPUT SETUP menu
may be substituted. Likewise, whenever the DVD1 input appears as a step in a menu path, any other input may be substituted.
DVD1 ANLG IN LVL
AUTO ON
MANUAL +0dB
AUTO GAIN +0.0dB
L C R SL SR SB LFE
X X X XXX X
0
-6
-15
-30
-45
dB
AUTO OFF
ON
OFF