Filter
Top Products
CUSTOM SETUP
FRONT L/R 80Hz
CENTER 80Hz
SIDE L/R 80Hz
REAR L/R 80Hz
SUBWOOFER 80Hz
THX ULTRA2 SUB OFF
BGC N/A
ASA APART
SETUP
JBL Synthesis
3-32
SUBWOOFER FULL, 30Hz to 120Hz, THX 80Hz, NONE
Opens the SUBWOOFER menu shown above, which can be used to
select a crossover point for the Main Zone audio output connector
labeled Subwoofer. When set to FULL, the SDP-5 sends a full-range
audio output signal to this connector. Otherwise, the SDP-5
activates a crossover point at the selected setting. Choose the
setting equal to the lowest setting of the other speakers.
Note:
When the SUBWOOFER parameter is set to NONE,
subwoofer signals will not be redirected if the 5.1a
BYPASS listening mode is activated. To redirect
subwoofer signals, configure the speaker setup with
the associated DVD-A/SACD player.
SUBWOOFER
CUSTOM SETUP
SPEAKERS
SETUP
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
SETUP
SETUP
INPUTS
SPEAKERS
REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGER
LOCK OPTIONS
SPEAKERS
SPEAKER SETUP
CUSTOM SETUP
SYNTHESIS 7CH SETUP
SPEAKER DISTANCES
LEVELS CALIBRATION
80Hz 80Hz
80Hz 80Hz 80Hz
80Hz 80Hz
80Hz
L
M
SUB
R
C
SL
SR
RL
RR
CUSTOM SETUP
SUBWOOFER 80Hz
SUBWOOFER
FULL
30Hz
40Hz
50Hz
60Hz
70Hz
80Hz
THX 80Hz
90Hz
100Hz
110Hz
120Hz
NONE
Custom Speaker Setups (continued from page 3-31)