Filter
Top Products
SETUP
JBL Synthesis
3-46
8 STEREO INPUTS
Configures the analog audio input connectors as eight stereo
connectors, which is the factory-default configuration.
When the analog audio input connectors are configured as
eight stereo connectors:
• All connectors are configured as stereo connectors.
• Neither of the 5.1-channel connectors is available. Sources that
were assigned to the 5.1-channel connector labeled 3, 4, and
5 are reassigned to the stereo connectors labeled 3, 4, and 5.
Sources that were assigned to the 5.1-channel connector
labeled 6, 7, and 8 are reassigned to the stereo connectors
labeled 6, 7, and 8.
8 STEREO INPUTS
REAR PANEL CONFIG
SETUP
5 ST. & (1) 5.1 ANLG
Configures the analog audio input connectors as one 5.1-channel
and five stereo connectors.
When the analog audio input connectors are configured as one
5.1-channel and five stereo connectors:
• The connectors labeled 1, 2, 3, 4, and 5 are configured as
stereo connectors.
• The connectors labeled 6, 7, and 8 are configured as a
5.1-channel connector. This connector is sent to the Main
Zone audio output connectors as indicated in the table at the
bottom of the next column.
5 ST. & (1) 5.1 ANLG
REAR PANEL CONFIG
SETUP
REAR PANEL CONFIG
8 STEREO INPUTS
OR
5 ST. & (1) 5.1 ANLG
OR
2 ST. & (2) 5.1 ANLG
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
SETUP
SETUP
INPUTS
SPEAKERS
REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGER
LOCK OPTIONS
REAR PANEL CONFIG
REAR PANEL CONFIG
Selecting the SETUP menu REAR PANEL CONFIG option opens the REAR PANEL CONFIG menu shown below, which can be used to configure
the analog audio input connectors as eight stereo connectors, one 5.1-channel and five stereo connectors, or two stereo and two 5.1-channel
connectors.
REAR PANEL CONFIG
SETUP