Filter
Top Products
SETUP
SDP-5
3-35
SYNTHESIS 7-CHANNEL SPEAKER SETUPS
When the SPEAKER SETUP menu SYNTHESIS 7CH SETUP option is
selected, the SYNTHESIS 7CH SETUP message shown above
appears on the on-screen and front panel displays. When this
message appears, press the remote control arrow to open the
SYNTHESIS 7CH SETUP menu and configure the Main Zone audio
output connectors for a JBL Synthesis 7-channel speaker setup or
press the arrow to close the message without configuring the
Main Zone audio output connectors for a JBL Synthesis 7-channel
speaker setup.
When the SYNTHESIS 7CH SETUP menu opens, the Main Zone
audio output connectors are configured for a JBL Synthesis
7-channel speaker setup. The SDP-5 ignores all CUSTOM SETUP
menu parameter settings and applies an 80Hz crossover point with
24dB per-octave filter to all output connectors. This configuration
is applied to all inputs and listening modes.
SYNTHESIS 7CH SETUP
SPEAKERS
SETUP
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
SETUP
SETUP
INPUTS
SPEAKERS
REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGER
LOCK OPTIONS
SPEAKERS
SPEAKER SETUP
CUSTOM SETUP
SYNTHESIS 7CH SETUP
SPEAKER DISTANCES
LEVELS CALIBRATION
80Hz 80Hz
80Hz 80Hz 80Hz
80Hz 80Hz
80Hz
L
M
SUB
R
C
SL
SR
RL
RR
SYNTHESIS 7CH SETUP
Note:
•A JBL Synthesis 7-channel speaker setup includes
THX-certified loudspeakers. Use the CUSTOM
SETUP menu to configure a custom speaker setup
for systems that do not include THX-certified
loudspeakers.
•A JBL Synthesis 7-channel speaker setup is not
required to activate THX listening modes.
Default Possible
Parameter Setting Setting(s)
FRONT L/R* 80Hz 80Hz
CENTER* 80Hz 80Hz
SIDE L/R* 80Hz 80Hz
REAR L/R 80Hz 80Hz, NONE
SUBWOOFER* 80Hz 80Hz
THX ULTRA2 SUB OFF ON, OFF
BGC N/A ON, OFF
ASA APART TOGETHER, CLOSE, APART
*These parameters cannot be adjusted.
. . . Synthesis 7-Channel Speaker Setups continues on page 3-36
SYNTHESIS 7CH SETUP
!CAUTION!
PRESSING THE V
BUTTON WILL
AUTOMATICALLY CHANGE
THE OUTPUTS TO A
SYNTHESIS
7CH SPEAKER
CONFIGURATION
SYNTHESIS 7CH SETUP
FRONT L/R* 80Hz
CENTER* 80Hz
SIDE L/R* 80Hz
REAR L/R 80Hz
SUBWOOFER* 80Hz
THX ULTRA2 SUB OFF
BGC N/A
ASA APART
* These parameters cannot be
adjusted.
When a THX speaker setup is selected, all CUSTOM
SETUP menu parameters are automatically set to 80Hz.
However, a custom speaker setup can still be
configured with the CUSTOM SETUP menu.