Filter
Top Products
SETUP
JBL Synthesis
3-6
The SDP-5 has eight configurable inputs, each of which can be
assigned to its eight digital audio, eight analog audio, five
composite video, five S-video, or three component video input
connectors. The table below lists the INPUT SETUP menu
parameters that can be used to assign audio and video input
connectors. The ANLG IN LVL parameter can be used to adjust
analog audio input levels for the selected input. These parameters
are highlighted on the INPUT SETUP menu shown above.
Parameter Possible Settings
DIGITAL IN COAX-1 to 4, OPTICAL-1 to 4, NONE
ANALOG IN ANALOG-1 to 8, 5.1 ANLG (3-5) or (6-8),
NONE
ANLG IN LVL AUTO, -18 to +12dB
VIDEO IN COMPOSITE-1 to 5, S-VIDEO-1 to 5, NONE
COMPONENT IN COMPONENT 1 to 3, NONE
ASSIGNING AUDIO & VIDEO INPUT CONNECTORS
DVD1 INPUT SETUP
NAME DVD1
DIGITAL IN COAX-1
ANALOG IN NONE
ANLG IN LVL AUTO
VIDEO IN S-VIDEO-1
COMPONENT IN 1
2-CH L7 FILM
%!D 5.1 L7 FILM
DTS-ES DTS-ES L7 FILM
MAIN ADVANCED
ZONE2 IN DIGITAL
DIGITAL IN COAX-1
ANALOG IN NONE
ANLG IN LVL +0dB
VIDEO IN S-VIDEO-1
COMPONENT IN 1
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
SETUP
SETUP
INPUTS
SPEAKERS
REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGER
LOCK OPTIONS
INPUT SETUP
DVD1
DVD2
SAT
VCR
TV
CD
TUNER
AUX
INPUTS DVD1
The DVD1 INPUT SETUP menu is shown here as an example, and will continue to be shown as an example throughout this section. Whenever it appears, any other INPUT SETUP menu
may be substituted. Likewise, whenever the DVD1 input appears as a step in a menu path, any other input may be substituted.