Filter
Top Products
CUSTOM SETUP
FRONT L/R 80Hz
CENTER 80Hz
SIDE L/R 80Hz
REAR L/R 80Hz
SUBWOOFER 80Hz
THX ULTRA2 SUB OFF
BGC N/A
ASA APART
SETUP
JBL Synthesis
3-30
Note:
When the SIDE L/R parameter is set to NONE, Dolby
Digital Surround EX, THX Ultra2, THX Surround EX ,
and dts-ES decoding are not available.
SIDE L/R FULL, 30Hz to 120Hz, THX 80Hz, NONE
Opens the SIDE L/R SPEAKERS menu shown above, which can be
used to select a crossover point for the Main Zone audio output
connectors labeled Side L/R. When set to FULL, the SDP-5 sends a
full-range audio output signal to these connectors. Otherwise, the
SDP-5 activates a crossover point at the selected setting. Choose
the setting closest to the low-frequency rating of the associated
speakers.
When set to NONE, the SDP-5 redirects side channel signals to the
Main Zone audio output connectors labeled Rear L/R. If the
CUSTOM SETUP menu REAR L/R parameter is also set to NONE, the
SDP-5 redirects surround channel signals to the Main Zone audio
output connectors labeled Front L/R.
SIDE L/R
CUSTOM SETUP
SPEAKERS
SETUP
Custom Speaker Setups (continued from page 3-29)
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
SETUP
SETUP
INPUTS
SPEAKERS
REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGER
LOCK OPTIONS
SPEAKERS
SPEAKER SETUP
CUSTOM SETUP
SYNTHESIS 7CH SETUP
SPEAKER DISTANCES
LEVELS CALIBRATION
80Hz 80Hz
80Hz 80Hz 80Hz
80Hz 80Hz
80Hz
L
M
SUB
R
C
SL
SR
RL
RR
CUSTOM SETUP
SIDE L/R 80Hz
SIDE L/R SPEAKERS
FULL
30Hz
40Hz
50Hz
60Hz
70Hz
80Hz
THX 80Hz
90Hz
100Hz
110Hz
120Hz
NONE