Filter
Top Products
SETUP
SDP-5
3-7
DIGITAL IN COAX-1 to 4, OPTICAL-1 to 4, NONE
Opens the DIGITAL IN menu shown above, which can be used to
assign a digital audio input connector for the selected input. The
SDP-5 has eight configurable inputs, each of which can be assigned
to any of its eight digital audio input connectors.
Note:
The digital audio input connectors are compatible
with PCM (44.1, 48, 88.2, and 96kHz), Dolby
Digital, and dts(-ES) sources. The digital audio input
connectors are not compatible with MPEG (MP3)
sources.
DIGITAL IN
DVD1
INPUTS
SETUP
Please note the following:
• When no digital audio input connector is assigned, the SDP-5
will automatically set the MAIN ADV menu INPUT SELECT
parameter to ANALOG (3-18).
•A digital audio input connector must be assigned when no
analog audio input connector is assigned. Refer to the next
page for information about assigning an analog audio input
connector.
. . . Assigning Audio & Video Input Connectors continues on page 3-8
DVD1 INPUT SETUP
NAME DVD1
DIGITAL IN COAX-1
ANALOG IN NONE
ANLG IN LVL +0dB
VIDEO IN S-VIDEO-1
COMPONENT IN 1
2-CH L7 FILM
%!D 5.1 L7 FILM
DTS-ES DTS-ES L7 FILM
MAIN ADVANCED
ZONE2 IN DIGITAL
DIGITAL IN COAX-1
DVD1 DIGITAL IN
COAX-1
COAX-2
COAX-3
COAX-4
OPTICAL-1
OPTICAL-2
OPTICAL-3
OPTICAL-4
NONE
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
SETUP
SETUP
INPUTS
SPEAKERS
REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGER
LOCK OPTIONS
INPUT SETUP
DVD1
DVD2
SAT
VCR
TV
CD
TUNER
AUX
INPUTS DVD1
The DVD1 INPUT SETUP menu is shown here as an example, and will continue to be shown as an example throughout this section. Whenever it appears, any other INPUT SETUP menu
may be substituted. Likewise, whenever the DVD1 input appears as a step in a menu path, any other input may be substituted.