Filter
Top Products
MODE ADJUST
SDP-5
5-27
2CH BYPASS
• Designed for playback of 2-channel analog sources.
• Analog audio input signals are sent to the Main Zone audio
output connectors labeled Front L/R. These input signals
receive no internal processing.
• The 2CH BYPASS listening mode is automatically activated
when a 2-channel analog audio source is present and the MAIN
ADV menu 2-CH ANLG BYP parameter is set to ON.
• The 2CH BYPASS listening mode is not available when the
MAIN ADV menu INPUT SELECT parameter is set to AUTO and
a digital audio source is present.
• No parameters are available for the 2CH BYPASS listening
mode.
Note:
Speaker crossover settings, speaker distances, and
audio (tone) controls are not available when the 2CH
BYPASS listening mode is activated.
5.1a BYPASS
• Designed for playback of 5.1-channel analog sources, such as
DVD-A or SACD players.
• The 5.1-channel analog input connectors are sent directly to
the Main Zone volume control and audio output connectors as
shown on page 3-46. These signals receive no internal
processing.
• When both side and rear speakers are present, surround
channel signals are sent in parallel to the side and rear speakers.
To configure a 5-channel speaker setup, set the OUTPUT
LEVELS menu SIDE L/R or REAR L/R parameter to OFF to
deactivate the associated surround speakers.
• The 5.1a BYPASS listening mode is automatically activated
whenever one of the 5.1-channel analog audio input connectors
is assigned to the selected input.
• The 5.1a BYPASS listening mode is the only listening mode
available for 5.1-channel analog sources.
Option/
Parameter
OUTPUT LEVELS
CUSTOM
Listening mode menu option and parameter descriptions begin on page 5-28.
Note:
Speaker crossover settings, speaker distances, and
audio (tone) controls are not available when the 5.1a
BYPASS listening mode is activated.
MODE ADJUST 2CH BYPASS
MODE ADJUST 5.1a BYPASS